Monthly archives: May 2015
Entries found: 5
SELF-ADJUSTABLE CLAMP RING WITH BELT
Self-adjustable clamp ring with belt is made of high quality Poliamid, self-extinguishable V0, resistant to heating 110C without deformation. It is produced in grey colour RAL 7035. It is intended for tightening all types of electro , plumbing pipes, heating and gas pipes, for direct tightening of cables on the walls, ceiling, poles, electrical cabinats. Advantages:
Simple and fast mounting on all types of installation with greatest possible saving of work hours. Self-adjustable clamp ring with belt is intended for the places where good mechanical connection is needed, where there is higher temperature and they are suitable for outside use due to their resistance to UV rays. With only two type of self-adjustable clamp ring with belt the outside dimension comprise fi 15-42mm which substantially make assembly work easier.
| Code number | Opening diameter mm | Package pcs | Weight kg/100pcs |
| 5340100 | Ø15-25 | 100 | 0.5 |
| 5340102 | Ø24-42 | 100 | 1 |
COUPLINGS
These couplings are made of PVC or polyamide. Polyamide couplings with glass fibers are used where high tension strength is needed. Conform to DIN 46320 standards. Couplings are self-extinguishable and resistant to UV-rays and weather conditions. Currently, these are the only couplings being used as they offer complete protection from contact with voltage.
|
Code number PVC Polyamid |
Type | Thread PG(Re | For cabel diameter mm | Package pcs | Weight kg/100pcs | |
| 5300091 | 5300071 | FU PG-13,5 | 13,5 | 8-12 | 100 | 1,1/1,5 |
| 5300092 | 5300072 | FU PG-16 | 16 | 10-14 | 100 | 1,5/1,8 |
| 5300093 | 5300073 | FU PG-21 | 21 | 13-18 | 100 | 2,6/2,8 |
| 5300094 | 5300074 | FU PG-29 | 29 | 18-25 | 100 | 3,6/4,3 |
| 5300095 | 5300075 | FU PG-36 | 36 | 22-32 | 100 | 7,2/8,5 |
ARMORED FUSES
Armored fuses are used to secure residential connections for installation inside attics or in fuse boxes. The housing is made of thermoplastic. At customers demand, they can be delivered with 25 and 63A fuses (indicate when ordering).
| Code number | Type | Lenght mm | Width mm | Package pcs | Weight kg/pcs |
| 5100020 | 63A | 226 | 150 | 10 | 1.40 |
| 5100026 | 25A | 226 | 150 | 10 | 1.20 |
FUSE SWITCH DISCONNECTORS
Used for protection of electrical grid from short-circuiting and overloading . Intended for install ationon collectors . Easily installed, take up little free space on the installation board . Housing is made of self – extingu is hable polyester reinforced with fiberglass.
| Code number | Type | Rated current A | Rated voltage V | Insulation voltage V | Package pcs |
| 5400115 | FHOO-160/1 | 160 | 690 | 1000 | 1 |
| 5400116 | FHOO-160/3 | 160 | 690 | 1000 | 1 |
| 5400124 | FH1-250/1 | 250 | 690 | 1000 | 1 |
| 5400125 | FH1-250/3 | 250 | 690 | 1000 | 1 |
| 5400139 | FH2-400/1 | 400 | 690 | 1000 | 1 |
| 5400140 | FH2-400/3 | 400 | 690 | 1000 | 1 |
| 5400162 | FH3-630/1 | 630 | 690 | 1000 | 1 |
| 5400163 | FH3-630/3 | 630 | 690 | 1000 | 1 |
DISJUNCTIVE FUSE BASE
Used for protection of electrical grid from short-circuiting and overloading. Intended for installation on collectors. Easily installed, take up little free space on the installation board and they guarantee protection from accidental contact. Housing is made of self-extinguishable polyester reinforced with fiberglass.
| Code number | Type | Rated current A | Rated voltage V | Insulation voltage V | The distance rail mm |
| 5400037 | SLOO-160/3 | 160 | 690 | 750 | 100 |
| 5400031 | FD1-160-3 | 160 | 690 | 1000 | 185 |
| 5400032 | FD1-250/3 | 250 | 690 | 1000 | 185 |
| 5400033 | FD2-400/3 | 400 | 690 | 1000 | 185 |
| 5400034 | FD3-630/3 | 630 | 690 | 1000 | 185 |
FUSE RAILS
Used for protection of electrical grid from short-circuiting and overloading. Intended for installation on collectors. Easily installed, take up little free space on the installation board. Housing is made of self-extinguishable polyester reinforced with fiberglass.
| Code number | Type | Rated current A | Rated voltaage V | Insulation voltage V | Package pc |
| 5400041 | L00 – 160/3 | 160 | 690 | 750 | 1 |
| 5400042 | FR1 – 250/3 | 250 | 690 | 1000 | 1 |
| 5400043 | FR2 – 400/3 | 400 | 690 | 1000 | 1 |
| 5400044 | FR3 – 630/3 | 630 | 690 | 1000 | 1 |
DISJUNCTIVE 3-POLE FUSE BASE 50 A (ø14×51)
Used for protection of electrical grid from short-circuiting and overloading. Intended for montage on rails 35mm wide, and for maximum current up to 50A. It is used with cylinder fuses Ø14x51mm for rated current 2, 4, 6, 8, 10, 12, 16, 20, 25, 32, 40 or 50A. Sealing can be done in switched on and switched off position, with and without electric arc fuse. Incoming and outgoing conductors can be connected without screwing, in conductors range 1.5 up to 35 mm².
- Dimension:81x112x102 mm
- Weight: 33 kg/100 kom
- Code number: 5400250
THREE-POLE KNIFE-BLADE FUSE BASE
Used for protection of electrical networks from short circuiting and overloads.
Note: Protective elements are delivered separately and are used as additional protection for accidental contact with parts under voltage.
| Code number | Type | In A | Package pcs | Weight kg/pcs |
| 5410103 | FPK 160/3 | 160 | 1 | 0.56 |
| 5410253 | FPK 250/3 | 250 | 1 | 1.76 |
| 5410403 | FPK 400/3 | 400 | 1 | 3.07 |
SINGLE-POLE KNIFE-BLADE FUSE BASE
Used for protection of electrical networks from short circuiting and overloads.
Note: Protective elements are delivered separately and are used as additional protection for accidental contact with parts under
| Code number | Type | In A | Package pcs | Weight kg/pcs |
| 5410101 | FPK 160/1 | 160 | 3 | 0.18 |
| 5410251 | FPK 250/1 | 250 | 3 | 0.59 |
| 5410401 | FPK 400/1 | 400 | 3 | 1.03 |
HANDLE FOR KNIFE-BLADE FUSES
Used for placing and removing knife-blade fuses NV-00 to NV-03. The handle is made of insulated thermoplastic and can be used without protective gloves.
| Code number | Type | In A | Package pcs | Weight kg/pcs |
| 5410001 | NV-00-3 | 2-630 | 10 | 0.27 |
| 5410002 | PROTECTED | 2-630 | 10 | 0.50 |
