Monthly archives: May 2015
Entries found: 5
Installation example No.7
Connection of tap-off (separating) line on main ABC line
Material list necessary for installation :
| No | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0.19×0.7x5000M) | 4 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 4 |
| 3 | 3810021 | ES 1500 | Al bracket with carrying clamp up to 25-95mm² conductor | 1 | |
| 4 | 3802580 | PC 35-150 | Insulated waterproof connecting clamp FIDOS 35-150 | 4 | |
| 5 | 1710189 | FKV 180/9 | Cable tie | 3 | |
| 6 | 3810013 | CA 1500/2000 | Al bracket | 1 | |
| 7 | 3812079 | PA 1500 | Tension support clamp for ABC 54-71.5mm² | 1 |
Installation example No. 6
Connection of nulti conductor of ABC with post grounding
Material list necessary for installation:
| No | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0.19×0.7x5000M) | 2 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 2 |
| 3 | 3810021 | ES 1500 | Al bracket with carrying clamp up to 25-95mm² conductor | 1 | |
| 4 | 3802580 | PC 35-150 | Insulated waterproof connecting clamp FIDOS 35-150 | 1 | |
| 5 | 1710189 | FKV 180/9 | Cable tie | 3 | |
| 6 | 5200031 | Clamp for grounding on post | 1 |
Installation example No. 5
Double tension support of ABC for separating the overhead line under angle greater than 80 degrees
Material list necessary for installation :
| No | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0.79×0.7x5000M) | 4 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 4 |
| 3 | 3810013 | CA 1500/2000 | Al bracket | 2 | |
| 4 | 3812079 | PA 1500 | Tension support clamp for ABC 54-71.5 mm² | 2 | |
| 5 | 1710189 | FKV 180/9 | Cable tie | 3 |
Installation example No. 4
Tension support for ABC on post
Material list necessary for installation :
| No | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0.19×0.7x500M) | 2 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 2 |
| 3 | 3810013 | CA 1500/2000 | Al bracket | 2 | |
| 4 | 3812079 | PA 1500 | Tension support clamp for ABC 54-71.5 mm² | 2 | |
| 5 | 1710189 | FKV 180/9 | Cable tie | 3 |
Installation example No. 3
Angular carrying support of ABC on post
Material list necessary for installation :
| No | Code Marking | Productss Name | Note | Quantity | pcs. |
| 1 | 3810116 | ACO 16 | Steel bracket for installation on post | Kuka ∅16 | 2 |
| 2 | 4710080 | F 207 | Stainless steel band | (0.19×0.7x5000M) | 2 meters |
| 3 | 4710220 | A 19 | Clips | 19 mm | 2 |
| 4 | 3813095 | PA 450/95 | Tension support clamp for LV ABC | 2 | |
| 5 | 3802579 | PC 481 | Insulated adapter for shorting and grounding with clamp | 4 |
Installation example No. 2
For carrying support of ABC on the post, with clamp that has the network angular movement (cable) up to 30 degree towards the post and up to 50 degree from the post.
Material list necessary for installation:
| No. | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0,19×0,7x5000M) | 2 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 4 |
| 3 | 3810021 | ES 1500 | Al. bracket | 2 | |
| 4 | 1710189 | FKV 180/9 | Cable tie | 3 |
Installation example No. 1
Tension support and connection of overhead lines – ABC with cable line.
Material list necessary for installation :
| No. | Code Marking | Products Name | Note | Quantity | pcs. |
| 1 | 4710080 | F 207 | Stainless steel band | (0,19×0,7x5000M) | 4 meters |
| 2 | 4710320 | A 20 | Clips | 19 mm | 4 |
| 3 | 3810013 | CA 1500/2000 | Al. bracket | 1 | |
| 4 | 3812079 | PA 1500 | Clamp for tension support ABC 54/71,5 mm² | 1 | |
| 5 | 1710189 | FKV 180/9 | Cable tie | 3 | |
| 6 | 3405050 | MJPT 50 | FID jointing sleeve for phase conductors | 3 | |
| 7 | 3415454 | MJPT 54 N | FID jointing sleeve for phase conductors | 1 |
UNIVERSAL ROLLERS FOR LAYING CABLES
Use for laying cables along a route. By using these universal rollers time is saved and possible damage to the cables is avoided. The roller is made of silumine and the base of steel material, while the anti-corrosion protection is
by plastification. These universal rollers are of such construction that they permit the connection of additional rollers for angle turns of the cables and the bridging of trenches and ditches on the terrain. By connecting in this way it is possible to make a roller chain of unlimited length.
The steel rod used for joining and fastening the rollers is ordered separately.
- Package: 1 pc
- Weight: 7kg/pc
- Code number: 1800045
COME-ALONG FOR PULLING AERIAL CABLES 7-15
Device serves for pulling non-insulated aerial cables of external diameter of 7 to 15 mm.
One end of the device is fixed to a pole, facade or similar immobile object. By moving the handle, the lever system is activated by which two special grips alternately tighten and pull the cable, with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.
Maximum tightening force is 800 kg
- Length: 630 mm
- Weight: 5.7 kg
- Code number: 1884715
AUTOMATIC GRIPPER 6-14
Intended for pulling and tightening Al and Al-steel cables of external diameter of 6 to 14 mm.
Its construction with a system of levers grips the cable and while pulling automatically increases the pulling force by tightening the grip on the cable, thus permitting a quick and secure connection for pulling and tightening.
Maximum tightening force is 400 kg This automatic gripper has a built-in U-joint which permits quick and easy connection to pulley devices.
Gripper is made of a special aluminum alloy.
- Length: 308 mm
- Weight: 1.5 kg
- Code number: 1884614
