Monthly archives: May 2015
Entries found: 5
REFLECTOR for sports fields and industrial illumination
The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside.
By using anodized, finely polished aluminum for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.
- Protection degree: IP 65
- Nominal voltage: 220~240V, 50Hz
- Installed power: 150W,400W E40
- Base: E40
Code number | Type | Power W | A (mm) | B (mm) | C (mm) |
3900196 | Sodium | 1 x 1000W | 600 | 720 | 200 |
3900197 | Metal-halogen | 1 x 1000W | 600 | 720 | 200 |
REFLECTOR for lighting facades, smaller sports fields and large billboards
The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.
Protection degree: IP 65
Nominal voltage: 220~249V, 50Hz Installed power 400W
Base: E40
REFLECTOR for lighting billboards, facades
The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.
-Protection degree: IP 65
-Nominal voltage: 220~240V, 50Hz
-Installed power: 150W, 400W
-Base: RX7s
REFLECTOR for illuminating billboards, advertisements
The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.
- Protection degree IP 65
- Nominal voltage 220~240V, 50 Hz
- Installed power 150W, 400W
- Base Rx7s
LED REFLECTOR
The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.
- Installed power 30W
- Nominal voltage 220~240V, 50 Hz
- Protection degree IP 65
- Protection IK 08
PORTABLE FLOODLIGHT
Use for quick and simple lighting of desired areas. The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed, providing the most efficient use of energy. Supplied without bulb and wires.
Code number | Type | Power |
3900235 | portable without bulb | – |
FLOODLIGHT STANDS
Use for quick and simple lighting of desired areas. The lights can be raised to a height of 2800 mm, can be adjusted forward and back-ward, and can turn 360 degrees.
Code number | No of reflectors each | Height mm |
3910001 | 1 | 2800 |
3910002 | 2 | 2800 |
HALOGEN REFLECTOR
DESCRIPTION
Feman’s halogen reflectors are made to European standards.
The housing is of pressure cast silumine, and its construction is elaborated with ribs to diffuse heat. The surface protection of the housing is plasticized, making it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed so that the energy expenditure is used to the maximum. Adjustable to all positions as desired. All these characteristics make this reflector appropriate for a wide spectrum of applications for both exterior and interior installation, but most often is used to light entrances, displays, hallways, facades, monuments, etc.
Code number | Type | Power W |
3900200 | without bulb | – |
3900218 | with bulb | 200 |
3900220 | with bulb | 300 |
3900230 | with bulb | 500 |
HALOGEN REFLECTOR WITH SENSOR
DESCRIPTION
This halogen reflector with sensor has the following construction.
The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions.
The light beam is wide and equally distributed, so that the energy expended is used to the maximum. Adjustable to all positions as desired. Voltage is 220 V. Reflector with built-in automatic IR light sensor for switching on, with photo-cell time-clock for lighting, is ideal for an alarm.
All these characteristics make this reflector suitable for a wide spectrum of both exterior and interior installation, but it is most often used for illuminating entrances, displays, hallways, facades, monuments, etc.
Code number | Type | Power W |
3900210 | with sensor, without bulb | – |
3900213 | with sensor and bulb | 300 |
3900215 | with sensor and bulb | 500 |