Monthly archives: May 2015

Entries found: 5

AUTOMATIC GRIPPER FOR Al-Fe CABLES 8-24mm

 

Use for tightening Al-Fe cables of 8-24 mm diameter. Made of steel alloy, and tension pads are of Al alloy. If to be used for tightening
steel cables and ropes (which should be indicated when ordering) the tension pads will be made of steel.
Maximum tightening force is 2000 kg.

Automatic gripper for Al-Fe Cables 8-24mm

  • Length: 270 mm
  • Weight: 3.5 kg
  • Code number: 1884120

PULLEY GEAR WITH WIRE ROPE

 

This device serves for pulling loads of up to 800 kg using a wire rope of 8.3 mm
diameter. One end of the device is attached to a pole, facade or other similar immobile object.
Moving the handle activates the lever system by which the cable is tightened with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.

 

 

  • Length: 426 mm
  • Weight: 6.4 kgPulley gear with wire rope
  • Code number: 1885120 – 800 kg
  • Code number: 1885160 – 1600 kg

ELECTRICAL HOIST – WINCH

 

Device used for hoisting loads of up to 900 kg. Connects to 12V power supply so that it can be used in the field.
It also is supplied with a keyboard control for giving commands.

 

  • Length: 296 mmELECTRICAL HOIST - WINCH
  • Code number: 1885090

DEVICE FOR TIGHTENING CABLES AND HOISTING LOADS

 

Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 0.75 t and 3 t.

 

  • Code number: 1885075 – for 0.75 t
  • Code number: 1885300 – for  3 t

DEVICE FOR TIGHTENING CABLES AND HOISTING LOADSDEVICE FOR TIGHTENING CABLES AND HOISTING LOADS

DEVICE FOR TIGHTENING AND HOISTING LOADS – to 250 kg

 

Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 250 kg.

DEVICE FOR TIGHTENING AND HOISTING LOADS - to 250 kg

Code number: 1885025

 

DEVICE FOR TIGHTENING AND HOISTING LOADS - to 250 kg

DIES FOR: HYDRAULIC CRIMPER FS – 240

 

28-228-328-428-5

Wire diameter mm² 6 10 16 25 35 50 70
Code number of die for Cu gear 1882006 1882010 1882016 1882025 1882035 1882050 1882070
Wire diameter mm² 95 120 150 185 240
Code number of die for Cu gear 1882095 1882120 1882150 1882185 1882240
Wire diameter mm² 6 10 16 25 35 50 70
Code number of die for Al gear 1881016 1881025 1881035 1881050 1881070
Wire diameter mm² 95 120 150 185 240
Code number of die for Al gear 1881095 1881120 1881150 1881185 1881240
Wire diameter mm² 6 10 16 25 35 50 70
Code number of diefor forming Al sect. cable 1882323 1882324 1882325
Wire diameter mm² 95 120 150 185 240
Code number of diefor forming Al sect. cable 1882326 1882327 1882328 1882329 1882330
Wire diameter mm² 6 10 16 25 35 50 70
Code number of diefor forming Cu sect. cable 1882303 1882304 1882305
Wire diameter mm 95 120 150 185 240
Code number of diefor forming Cu sect. cable 1882306 1882307 1882308 1882309 1882310

 

28-6

MATRIX CARRIER, MATRIXES & ARBORS FOR HYDRAULIC HEAD FS-240

Code number Item
1880020 Matrix carrier per “SIMEL” 150-240 mm²
1880025 Matrix per “SIMEL” 150 mm²
1880030 Arbor per “SIMEL” 150 mm²
1880035 Matrix per “SIMEL” 240 mm²
1880040 Arbor per “SIMEL” 240 mm²

 

DIES FOR CRIMPER FP – 185

27-227-327-427-527-6

Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Cu gear 1801860 1801861 1801862 1801863 1801864 1801865 1801866
Wire diameter mm² 120 150 185
Code number of die for Cu gear 1801867 1801868 1801869
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Al gear 1801885 1801870 1801871 1801872 1801873 1801874 1801876
Wire diameter mm² 120 150 185
Code number of die for Al gear
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for threaded connector 1801880 1801881 1801882 1801883 1801884
Wire Diameter mm² 120 150 185
Code number of die for threaded connector
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for forming sect. cable 1801891 1801892 1801893 1801894
Wire diameter mm² 120 150 185
Code number of die for forming sect. cable 1801895 1801896 1801897
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for FID sleeves 1801886 1801886 1801886 1801886 1801888 1801888
Wire diameter mm² 120 150 185
Code number of die for FID sleeves

 

DIES FOR CRIMPERS: FRP-300, FHP-300 FRHP-300, FAP 62

26-226-3

26-426-526-6

Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Cu gear 1800310 1800311 1800312 1800313 1800314 1800315 1800316
Wire diameter mm² 120 150 185 240 300    
Code number of die for Cu gear 1800317 1800318 1800319 1800320 1800321    
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Al gear 1800341 1800342 1800343 1800344 1800345 1800346
Wire diameter mm² 120 150 185 240 300    
Code number of die for Al gear    
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for threaded connector 1800361 1800362 1800363 1800364 1800365 1800366
Wire diameter mm² 120 150 185 240 300    
Code number of die for threaded connector    
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for forming sect. cable 1801901 1801902 1801903 1801904
Wire diameter mm² 120 150 185 240 300    
Code number of die for forming sect. cable 1801905 1801906 1801907 1801908    
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for FID sleeves 1800325 1800325 1800325 1800325 1800327 1800327
Wire diameter mm² 120 150 185 240 300    
Code number of die for FID sleeves    

 

BATTERY POWERED CABLE CUTTER – FAM 85

 

Cutting capacity: Al wires: 46 mm Cu wires: 85 mm
Underground cable: 50 mm

Motor: 14.4 VDC Output force: 6tBATTERY POWERED CABLE CUTTER - FAM 85
Turning angle of head: 180º Gear: 1 charger
1 plastic carrying case

 

  • Dimensions: 505x310x75mm
  • Net weight of cutter: 8.5 kg
  • Code number: 6604185

BATTERY POWERED CRIMPER – FAP-60

 

  • Universal head rotates 360 degrees
  • Two speed hydraulic
  • Rapid braking of motorBATTERY POWERED CRIMPER - FAP-60
  • Automatic return of die to original position after crimping
  • Manual return of die if
  • Electronic control and tracking of operation being do
  • High performance of Ah with NiMH battery Working power: 60 kN
  • Battery: 14,4 V
  • Comes in a carrying case with:
  • Two batteries
  • Charger
  • Al dies 16-240
  • Cu dies 10-300

 

 

  • Weight: 5kg
  • Code number: 6604167
Page 4 of 42« First...«23456»102030...Last »
2021 © Feman Jagodina