[

Alati

RSS
Posts: 44

UNIVERSAL ROLLERS FOR LAYING CABLES

 

Use for laying cables along a route. By using these universal rollers time is saved and possible damage to the cables is avoided. The roller is made of silumine and the base of steel material, while the anti-corrosion protection is

by plastification. These universal rollers are of such construction that they permit the connection of additional rollers for angle turns of the cables and the bridging of trenches and ditches on the terrain. By connecting in this way it is possible to make a roller chain of unlimited length.

The steel rod used for joining and fastening the rollers is ordered separately.

 

  • Package: 1 pc Universal rollers for laying cables
  • Weight: 7kg/pc
  • Code number: 1800045

COME-ALONG FOR PULLING AERIAL CABLES 7-15

 

Device serves for pulling non-insulated aerial cables of external diameter of 7 to 15 mm.
One end of the device is fixed to a pole, facade or similar immobile object. By moving the handle, the lever system is activated by which two special grips alternately tighten and pull the cable, with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.

Maximum tightening force is 800 kg

 

  • Length: 630 mm
  • Weight: 5.7 kgCome-along  for pulling aerial cables 7-15
  • Code number: 1884715

AUTOMATIC GRIPPER 6-14

 

Intended for pulling and tightening Al and Al-steel cables of external diameter of 6 to 14 mm.
Its construction with a system of levers grips the cable and while pulling automatically increases the pulling force by tightening the grip on the cable, thus permitting a quick and secure connection for pulling and tightening.
Maximum tightening force is 400 kg This automatic gripper has a built-in U-joint which permits quick and easy connection to pulley devices.
Gripper is made of a special aluminum alloy.

 

  • Length: 308 mm
  • Weight: 1.5 kg
  • Code number: 1884614Automatic gripper 6-14

AUTOMATIC GRIPPER FOR Al-Fe CABLES 8-24mm

 

Use for tightening Al-Fe cables of 8-24 mm diameter. Made of steel alloy, and tension pads are of Al alloy. If to be used for tightening
steel cables and ropes (which should be indicated when ordering) the tension pads will be made of steel.
Maximum tightening force is 2000 kg.

Automatic gripper for Al-Fe Cables 8-24mm

  • Length: 270 mm
  • Weight: 3.5 kg
  • Code number: 1884120

PULLEY GEAR WITH WIRE ROPE

 

This device serves for pulling loads of up to 800 kg using a wire rope of 8.3 mm
diameter. One end of the device is attached to a pole, facade or other similar immobile object.
Moving the handle activates the lever system by which the cable is tightened with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.

 

 

  • Length: 426 mm
  • Weight: 6.4 kgPulley gear with wire rope
  • Code number: 1885120 – 800 kg
  • Code number: 1885160 – 1600 kg

ELECTRICAL HOIST – WINCH

 

Device used for hoisting loads of up to 900 kg. Connects to 12V power supply so that it can be used in the field.
It also is supplied with a keyboard control for giving commands.

 

  • Length: 296 mmELECTRICAL HOIST - WINCH
  • Code number: 1885090

DEVICE FOR TIGHTENING CABLES AND HOISTING LOADS

 

Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 0.75 t and 3 t.

 

  • Code number: 1885075 – for 0.75 t
  • Code number: 1885300 – for  3 t

DEVICE FOR TIGHTENING CABLES AND HOISTING LOADSDEVICE FOR TIGHTENING CABLES AND HOISTING LOADS

DEVICE FOR TIGHTENING AND HOISTING LOADS – to 250 kg

 

Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 250 kg.

DEVICE FOR TIGHTENING AND HOISTING LOADS - to 250 kg

Code number: 1885025

 

DEVICE FOR TIGHTENING AND HOISTING LOADS - to 250 kg

DIES FOR: HYDRAULIC CRIMPER FS – 240

 

28-228-328-428-5

Wire diameter mm² 6 10 16 25 35 50 70
Code number of die for Cu gear 1882006 1882010 1882016 1882025 1882035 1882050 1882070
Wire diameter mm² 95 120 150 185 240
Code number of die for Cu gear 1882095 1882120 1882150 1882185 1882240
Wire diameter mm² 6 10 16 25 35 50 70
Code number of die for Al gear 1881016 1881025 1881035 1881050 1881070
Wire diameter mm² 95 120 150 185 240
Code number of die for Al gear 1881095 1881120 1881150 1881185 1881240
Wire diameter mm² 6 10 16 25 35 50 70
Code number of diefor forming Al sect. cable 1882323 1882324 1882325
Wire diameter mm² 95 120 150 185 240
Code number of diefor forming Al sect. cable 1882326 1882327 1882328 1882329 1882330
Wire diameter mm² 6 10 16 25 35 50 70
Code number of diefor forming Cu sect. cable 1882303 1882304 1882305
Wire diameter mm 95 120 150 185 240
Code number of diefor forming Cu sect. cable 1882306 1882307 1882308 1882309 1882310

 

28-6

MATRIX CARRIER, MATRIXES & ARBORS FOR HYDRAULIC HEAD FS-240

Code number Item
1880020 Matrix carrier per “SIMEL” 150-240 mm²
1880025 Matrix per “SIMEL” 150 mm²
1880030 Arbor per “SIMEL” 150 mm²
1880035 Matrix per “SIMEL” 240 mm²
1880040 Arbor per “SIMEL” 240 mm²

 

DIES FOR CRIMPER FP – 185

27-227-327-427-527-6

Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Cu gear 1801860 1801861 1801862 1801863 1801864 1801865 1801866
Wire diameter mm² 120 150 185
Code number of die for Cu gear 1801867 1801868 1801869
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for Al gear 1801885 1801870 1801871 1801872 1801873 1801874 1801876
Wire diameter mm² 120 150 185
Code number of die for Al gear
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for threaded connector 1801880 1801881 1801882 1801883 1801884
Wire Diameter mm² 120 150 185
Code number of die for threaded connector
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for forming sect. cable 1801891 1801892 1801893 1801894
Wire diameter mm² 120 150 185
Code number of die for forming sect. cable 1801895 1801896 1801897
Wire diameter mm² 10 16 25 35 50 70 95
Code number of die for FID sleeves 1801886 1801886 1801886 1801886 1801888 1801888
Wire diameter mm² 120 150 185
Code number of die for FID sleeves

 

Page 1 of 512345»
2015 © Feman Jagodina