[

STRUJNA REDNA STEZALJKA

RSS
Posts: 13

TERMINAL BLOCK RAIL

 

Used to support terminal blocks joined in a series. The advantage of this rail is that it is calibrated so that the teeth of the elements firmly attach to the rail. Thanks to its narrow tolerance, the rail will not crack.

 

  • Package: 10 pcs
  • Weight: 31 kg/100pcsTERMINAL BLOCK RAIL 
  • Code number: 5000200

 

 

 

 

 

TERMINAL BLOCK RAILTERMINAL BLOCK RAIL

LIMIT PLATE FOR TERMINAL BLOCKS

 

These plates are attached to the rail at the end of a block series. Thanks to the specially designed base, the plate fits all standard rails. The plate is made of high-quality polyamide.

 

  • Package: 100 pcs
  • Weight: 0, 96 kg/100pcs
  • Code number: 5000120

 

 

LIMIT PLATE FOR TERMINAL BLOCKSLIMIT PLATE FOR TERMINAL BLOCKS

END CAP FOR TERMINAL BLOCKS

 

Used to end a series of clamps by closing the open part of the clamp. Also used for separating groups of clamps.

END CAP FOR TERMINAL BLOCKS END CAP FOR TERMINAL BLOCKS

Code number For VS clamp AxB mm Package pcs Weight kg/100pcs
5000104 FKN 4-10 37×40 500 0.30
5000116 FKN 16-35 42×50 500 0.42
5000117 FKN 16P 36×58 500 0.29

 

PARTITION PLATE FOR TERMINAL BLOCKS

 

Used for separating commoning link when making a series of VS clamps. Plate thickness is 0.5 mm.

 

  • Package: 100 pcs
  • Weight: 0,01 kg/100pcs
  • Code number: 5000118

PARTITION PLATE FOR TERMINAL BLOCKSPARTITION PLATE FOR TERMINAL BLOCKS

TERMINAL BLOCKS (VS-CLAMPS) SPANNING 1, 5 – 16 mm2 – WITH GEAR

 

Note: When connecting wire products to VS-clamps, always use insulated connectors or pin-type terminals, or solder the ends.

TERMINAL BLOCKS (VS-CLAMPS) SPANNING 1, 5 - 16 mm2 - WITH GEAR TERMINAL BLOCKS (VS-CLAMPS) SPANNING 1, 5 - 16 mm2 - WITH GEAR

Code number Designation mm² Dimensions AxBxC Package pcs Weight kg/100pcs
5000066 FKN 16P 53×50 50 3.20
5000281  – 50 0.60
5000282  – 50 0.63
5000284  – 50 0.90

 

VS CLAMPS FOR STRINGING

 

FEMAN’s clamp housing for placement in sequence is from recently made exclusively of high quality imported mass, self-extinguishing V-0 and with insulation fixture of 750V and heat resistance 110°C without deformation. The base of the clamp is so constructed to enable them to be placed on all existing rails. FEMAN’S VS clamp are made all in accordance with valid IEC regulations  defined for these products. In addition to various size of the clamps (2,5-35mm2), company FEMAN also produces the whole range of accessories-elements.

FEMAN is proved its quality in making the clamps for placement in sequence in the last few years and the reference is more then million pieces delivered and mounted in all dimensions.

VS CLAMPS FOR STRINGINGVS CLAMPS FOR STRINGING

Code number Type Dimension AxBxC Packing pcs Weight kg/100pcs
5000004 FKN 2.5-4 48x40x7 120 1.31
5000006 FKN 6 48x40x9 100 1.80
5000010 FKN 10 48x40x10 100 2.20
5000016 FKN 16 53x50x12 50 2.93
5000035 FKN 25-35 53x50x15 50 4.75

57-4

CURRENT CLAMP FRS SIX-POLE 95/6x(4-16)

 

It is intended for scheming of measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.CURRENT CLAMP FRS SIX-POLE 95/6x(4-16)

The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 16mm2. Maximum cross section of six branching conductors is 16mm2.

Code no. Type Clamping capability of the main conductor Clamping capability
of the branching conductor
Packing pcs Mass kg/100pcs
5000176 FRS 95/6x(4-16) 10-16-25-35-50-70-95 mm2 6x(4-6-10-16) mm2 20 30

 

CURRENT CLAMP FRS FOUR-POLE 95/4x(1,5-6)

 

It is intended for circuits in measuring and distribution enclosures. Housing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp housing is constructed to enable it to be placed in sequence on all existing rails CURRENT CLAMP FRS FOUR-POLE 95/4x(1,5-6)and can be connected sequentially.

The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 95mm2.Maximum cross section of four branching conductors is 6mm2.

 

 

Code number Type Clamping capability of the main conductor Clamping capability of the branching conductor Packing pcs Mass kg/100pcs
5000174 FRS 95/4x(1,5-6) 6-10-16-25-35-50-70-95 mm2 4x(1,5-2,5-4-6) mm2 20 23

 

CURRENT MODULAR CLAMP FRS

 

It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing CURRENT MODULAR CLAMP FRSrails and can be connected sequentially.

Cross section of main conductor is 4-35mm2 and cross section of branching conductor is also 4-35mm2.

 

Code number Type Clamping capability of the main conductor Clamping capability of the branching conductor Packing pcs Mass kg/100pcs
5000167 FRS 25-35/1 4-6-10-16-25-35 mm2 4-6-10-16-25-35 mm2 75 6.5
5000168 FRS 25-35/2 4-6-10-16-25-35 mm2 4-6-10-16-25-35 mm2 75 13
5000170 FRS 25-35/4 4-6-10-16-25-35 mm2 4-6-10-16-25-35 mm2 75 26

 

CURRENT MODULAR CLAMP MRS 4-16

 

It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.CURRENT MODULAR CLAMP MRS 4-16

Cross section of main conductor is 4-16mm2 and cross section of branching conductor is also 4-16mm2.

 

Code number Type Clamping capability of the main conductor Clamping capabilityof the branching conductor Packing pcs Mass kg/100pcs
5000185 MRS 4-16/1 4-6-10-16 mm2 4-6-10-16 mm2 150 2.5
5000186 MRS 4-16/2 4-6-10-16 mm2 4-6-10-16 mm2 100 5
5000187 MRS 4-16/3 4-6-10-16 mm2 4-6-10-16 mm2 50 10

 

Page 1 of 212»
2015 © Feman Jagodina