[

Rasveta

RSS
Posts: 42

LED KRISTAL 22 – STREET LIGHT

02 1 02 2

 

 

 

 

 

Specifications:

  • IP protection…..IP 67
  • IK resistance….IC 8
  • Mounting on pole…..6-10 m
  • Luminous flux……100lm/W

 

Lamps A B C Assembly
Led kristal 22 730 290 100 ∅60
Code number Lamps Led power source W Total power W Voltage V Weight kg/pcs
3900372 Led krsital 22 100 115 220 7.600

LED lamps used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of tempered glass, aluminum mirror, diode lamp with lenses on the diods and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy.

Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility of bringing electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that direct light. Energy saving is the life of LED which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diodes have high efficiency, unlike other sources of light whose intensity drop during operation up to 50% ,sodium lamps after 30,000 hours, while the LED’s intensity drop 30%, after 70,000 hours .

LED KRISTAL 11 – STREET LIGHT

 

01 1 01 2

 

 

 

 

 

 

Specifications:

  • IP protection…..IP 67
  • IK resistance….IC 8
  • Mounting on pole…..3-10 m
  • Luminous flux……100lm/W

 

 

Lamps A B C Assembly
Led kristal 11 635 270 90 ∅60
Code number Lamps Led power source W Total power W Voltage V Weight kg/pcs
3900371 Led krsital 11 50 55 220 3.600

LED lamps used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of tempered glass, aluminum mirror, diode lamp with lenses on the diods and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy.

Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility of bringing electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that direct light. Energy saving is the life of LED which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diodes have high efficiency, unlike other sources of light whose intensity drop during operation up to 50% ,sodium lamps after 30,000 hours, while the LED’s intensity drop 30%, after 70,000 hours .

LED KRISTAL 4 – STREET LIGHT

 

09 1
09 2

 

 
Specifications:

  • IP protection…..IP 67
  • IK resistance….IC 8
  • Mounting on pole…..4-12 m
  • Luminous flux……100lm/W

 

Lamps A B C
Led kristal 4 605 270 94
Code number Lamps Led power source W Total power W Voltage V Weight kg/pcs
3900378 Led krsital 4 100 112 220 3.400
3900379 Led kristal 4 150 165 220 3.400

 

LED lamps used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of tempered glass, aluminum mirror, diode lamp with lenses on the diods and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy.

Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility of bringing electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that direct light. Energy saving is the life of LED which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diodes have high efficiency, unlike other sources of light whose intensity drop during operation up to 50% ,sodium lamps after 30,000 hours, while the LED’s intensity drop 30%, after 70,000 hours .

LED KRISTAL 2 – STREET LIGHT

 

05 2 05 1

 

 

 

 

 

 

Specifications:

  • IP protection…..IP 67
  • IK resistance….IC 8
  • Mounting on pole…..5-9 m
  • Luminous flux……100lm/W

 

Lamps A B C Assembly
Led kristal 2 535 260 71 ∅60
Code number Lamps Led power source W Total power W Voltage V Weight kg/pcs
3900362 Led kristal 2 70 78 220 4.500

 

LED lamps used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of tempered glass, aluminum mirror, diode lamp with lenses on the diods and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy.

Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility of bringing electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that direct light. Energy saving is the life of LED which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diodes have high efficiency, unlike other sources of light whose intensity drop during operation up to 50% ,sodium lamps after 30,000 hours, while the LED’s intensity drop 30%, after 70,000 hours .

CLIPS FOR STAINLESS STEEL BANDS

Used for attaching stainless steel bands to poles.

CLIPS FOR STAINLESS STEEL BANDS

Code number Type A mm B mm C mm D mm Package pcs Weight kg/100pcs
4710213 A13 32 27 10 16 100 1.0
4710219 A19 42 27 12 25 100 1.2
4710320 A20 23.2 25 14 21.2 150 0.8

 

PULLING GRIP FOR STAINLESS STEEL BANDS FZT

 

Used for tightening and cutting of stainless steel bands (steel support rings) used for securing equipment to poles. This is a very reliable and practical way for quick and easy securing of brackets, stands, supports, lamps, protection devices, signs, etc. on metal, concrete or wooden pole – supports, making a long lasting, greatly tightened, secure attachment without drilling and welding. This system has long been in use by the electrical industry in the developed countries.

  • Packing: 1 pcs
  • Weight: 1.8 kg/ pcsPULLING GRIP FOR STAINLESS STEEL BANDS FZT
  • Code number: 4710002

PULLING GRIP FOR STAINLESS STEEL BANDS

 

Used for tightening and cutting of stainless steel bands (steel support rings) used for securing equipment to poles. This is a very reliable and practical way for quick and easy securing of brackets, stands, supports, lamps, protection devices, signs, etc. on metal, concrete or wooden pole – supports, making a long lasting, greatly tightened, secure attachment without drilling and welding. This system has long been in use by the electrical industry in the developed countries.

  • Packing: 1 pcs PULLING GRIP FOR STAINLESS STEEL BANDS
  • Weight: 1.78 kg/ pcs
  • Code number: 4710000

FLUORESCENT FIXTURES WITH AND WITHOUT SHADES

We make open type fluorescent armatures in three standard dimensions: 20W-618 mm, 40W- 1228 mm, 65W-1528 mm.
We make all three kinds for one, two or three fluorescent tubes with or without the corresponding reflector. The lamp housing is made of pickled, profiled sheet metal with baked on white enamel, completely wired in accord with the appropriate JUS and IEC standards. The lights are made with IP 20 protection and enable quick and easy installation.
They are designed for general use areas: hospitals, hallways, passages, warehouses and all other locations where lights are not exposed to great exposure to dust and damp.
Fluorescent lights can be also installed in a linear system which enables quick mounting and is universally accepted. The linear system consists of an upper part (housing of a specified length) and a lower part (tube housing of a specified electrical power). Advantages are: Quick installation, long lasting and simple maintenance. The linear system is made with IP 20 protection and is recommended for use in factories, halls, warehouses and areas where lights are not exposed to great exposure to dust and liquids. If the area is higher than 5 m we recommend using reflectors that direct the light beam from above.

FLUORESCENT FIXTURES WITH AND WITHOUT SHADESFLUORESCENT FIXTURES WITH AND WITHOUT SHADES

Code number Type Power W
3901020 FOS -120 1 x 2
3902020 FOS-220 2 x 20
3903020 FOS-320 3 x 20
3901040 FOS-140 1 x 40
3902040 FOS-240 2 x 40
3903040 FOS-340 3 x 40
3901012 reflector 20
3901015 reflector 40

 

WATER-RESISTANT FLUORESCENT FIXTURES

 

DESCRIPTION

Lamp is intended for lighting of industrial objects, especially where there is a greater exposure to damp and dust. The lamp body is made of ABS. The fasteners for securing the cover are stainless steel. The polyurethane gasket is cast directly into a groove of the lamp. Polyamide couplings enable IP 65 protection. The cover is made of transparent poly-carbonate, which is UV stabile, (which means that there will not be any great change in the material due to the effects of ultra-violet light rays). The steel reflection plate is plasticized in white and is UV stable.

WATER-RESISTANT FLUORESCENT FIXTURES 39-5
39-6
Code number Max power W Degree od protection Dimensions mm Weight kg
3910118 1 x 18W IP 65 670 x 105 x 75 0,9
WATER-RESISTANT FLUORESCENT FIXTURES 39-2
39-3
Code number Max power W Degree od protection Dimensions mm Weight kg
3910218 2 x 18W IP 65 670 x 105 x 75 1,46
40-1 40-2
40-3
Code number Max power W Degree od protection Dimensions mm Weight kg
3910236 2 x 36W IP 65 1270 x 165 x 75 2,3
40-4 40-5
40-6
Code number Max power W Degree od protection Dimensions mm Weight kg
3910118 1 x 18W IP 65 670 x 105 x 75 0,9

 

HALOGEN REFLECTOR 2000W

 

DESCRIPTION

Reflector can be installed either on a wall or a pole. The reflection surface, (rotationally msymmetric) is    made    of   quality    polished aluminum, making very shiny. The light beam is wide and equally distributed, so that the energy expenditure is used to the maximum. Adjustable   to    all   positions   as desired. The insulation degree of the lamp is IP54. The reflector is connected to a voltage network of 230V/400V. The recommended diameter of copper cable is 3×2,5 mm2.

Accompanying gear:HALOGEN REFLECTOR 2000W

  • Metal-halogen bulb 2000W
  • Condenser 60µF ,400V

 

All these characteristics make this reflector suitable for a wide spectrum of usage, for both exterior and interior installation, but most often used for illuminating entrances and approaches to factory grounds, sports fields, stadiums, work-shops, displays, hallways, facades, etc.

 

Page 1 of 512345»
2015 © Feman Jagodina