[
1234

CARRIED AND ANGULAR SUPPORT. AND ATTACHING OF SELF SUPPORTING BUNCH

 

Self supporting bunch support holding is made by clamp for carrying support and Al universal pillar bracket. Holding is made by carrying conductor (54-71.5mm) and from the both side of the clamp, self-supporting bunch is caught by cable splices to prevent disentangling. After assembling of conductor, special fastener on the clamp should be closed to prevent self-supporting bunch slacking. The direction changing of distributing self-supporting bunch (angular supporting) can be done by means of two clamps which are hung on Al universal pillar bracket. Also, in this way it could be done the attaching of self supporting bunch by means of FID insulated waterproof sleeves. The pillar bracket with hooks is used for fixing Al universal bracket on the pillar, but at the same time, multi purpose bracket can be also used.

CARRIED AND ANGULAR SUPPORT. AND ATTACHING OF SELF SUPPORTING BUNCH

2015 © Feman Jagodina