MRO4 600x1055x235 TEHNICAL DESCRIPTION OF MODULAR- MEASURING AND DISTRIBUTION BOXES
These boxes are mainly used for four measuring devices, distributed vertically. In order to install more measuring devices, they can be installed beside the first one or one above each other.
|Code number||Sort of mounting||Type||Dimensions mm||Protectrion degree|
|5082070||Post mounted||MRO 4-S||600 x 1055 x 235||IP 54|
|5082071||Wall mounted||MRO 4-Z||600 x 1055 x 235||IP 54|
|5082072||Mounted in wall||MRO 4-U||600 x 1055 x 235||IP 54|
|5082075||Freestanding with ground base||MRO 4-SSN||600 x 1425 x 235||IP 54|
|5082076||Freestanding with underground base||MRO 4-SSU||600 x 2110 x 235||IP 54|
|5083070||Post mounted||MRO 4-S||600 x 1055 x 235||IP 54|
|5083071||Wall mounted||MRO 4-Z||600 x 1055 x 235||IP 54|
|5083072||Mounted in wall||MRO 4-U||600 x 1055 x 235||IP 54|
|5083075||Freestanding with ground base||MRO 4-SSN||600 x 1425 x 235||IP 54|
|5083076||Freestanding with underground base||MRO 4-SSU||600 x 2110 x 235||IP 54|
It is made from pressed non- burning polyester, reinforced with glass fibers. It is resistant to strokes, bending and has high dialectical strength. Boxes are also resistant to weather conditions, as well as UV-rays. They have no harmful effect to the surroundings and can be completely recycled. They provide good mechanical and electrical protection and they fall under highly insulated boxes. By adding gasket rubber on doors, windows and other holes high degree of sealing IP 54 is achieved. For it’s good technical characteristics they can be used in wet rooms, ambiences with high presence of acid, dust or salt, power plants, rooms with high and low temperatures, industrial facilities etc. Usage is very simple and without additional maintenance. Usage and montage are very simplified. They count as highly sealed boxes.
In accordance with Europeans standards and norms we have developed wide range of additional equipment for boxes. At customer request we deliver boxes complete equipped according to technical instruction submitted by the customer.