HOB STRIPPER FLY-5274
Use for stripping wires of 0.75-6 mm². Includes an addition for pierced crimping.
STRIPPER FOR REMOVING SHEATHING FLY-700 B
Use for stripping insulation from wires of 0.75-4 mm² diameter.
UNIVERSAL WIRE STRIPPER FLY-700 D
Use for stripping of wires of 0.2-8 mm², with a stripping length regulator of up to 25 mm. Includes an addition for wire cutting.
STRIPPER FOR COAXIAL CABLE FHT-320
Use to remove sheath from coaxial cables (RG 58, RG 59 and RF 75). Along with the stripper is supplied a hex wrench which regulates the depth of the cut to the sheathing. The stripper has two blades that permit the independent removal of the external and internal coat.
AUTOMATIC TIE GUN FLY-600 L
Use to tighten ties of widths up to 13 mm when wrapping and placing cable bundles.
Has the possibility of regulating the jaw force, which permits the cutting off of the extra tie after reaching the indicated force.
UNIVERSAL KNIFE FOR STRIPPING SHEATH FLY-25-6
Use to remove sheathing from cables of diameter up to ø28mm. The bolt in the lower part of the knife regulates, depending on the diameter of the cable.
UNIVERSAL PLIERS FOR LEAD SEALS
Use for protection (lead seal) of metering groups, but also for all other locations where it is necessary to protect equipment from unauthorized opening.
TIE GUN – FLY-600
Use to tighten ties up to 5mm in width while wrapping and placing cables. Has the option of regulating the jaw force, which permits the cutting off of
the extra tie after reaching the designated force.