TERMINAL BLOCK RAIL

Used to support terminal blocks joined in a series. The advantage of this rail is that it is calibrated so that the teeth of the elements firmly attach to the rail. Thanks to its narrow tolerance, the rail will not crack.

• Package: 10 pcs
• Weight: 31 kg/100pcs 
• Code number: 5000200

LIMIT PLATE FOR TERMINAL BLOCKS

These plates are attached to the rail at the end of a block series. Thanks to the specially designed base, the plate fits all standard rails. The plate is made of high-quality polyamide.

• Package: 100 pcs
• Weight: 0, 96 kg/100pcs
• Code number: 5000120

END CAP FOR TERMINAL BLOCKS

Used to end a series of clamps by closing the open part of the clamp. Also used for separating groups of clamps.

PARTITION PLATE FOR TERMINAL BLOCKS

Used for separating commoning link when making a series of VS clamps. Plate thickness is 0.5 mm.

• Package: 100 pcs
• Weight: 0,01 kg/100pcs
• Code number: 5000118

TERMINAL BLOCKS (VS-CLAMPS) SPANNING 1, 5 – 16 mm2 – WITH GEAR

Note: When connecting wire products to VS-clamps, always use insulated connectors or pin-type terminals, or solder the ends.

VS CLAMPS FOR STRINGING

FEMAN’s clamp housing for placement in sequence is from recently made exclusively of high quality imported mass, self-extinguishing V-0 and with insulation fixture of 750V and heat resistance 110°C without deformation. The base of the clamp is so constructed to enable them to be placed on all existing rails. FEMAN’S VS clamp are made all in accordance with valid IEC regulations  defined for these products. In addition to various size of the clamps (2,5-35mm2), company FEMAN also produces the whole range of accessories-elements.

FEMAN is proved its quality in making the clamps for placement in sequence in the last few years and the reference is more then million pieces delivered and mounted in all dimensions.

CURRENT CLAMP FRS SIX-POLE 95/6x(4-16)

It is intended for scheming of measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.

The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 16mm2. Maximum cross section of six branching conductors is 16mm2.

CURRENT CLAMP FRS FOUR-POLE 95/4x(1,5-6)

It is intended for circuits in measuring and distribution enclosures. Housing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp housing is constructed to enable it to be placed in sequence on all existing rails and can be connected sequentially.

The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 95mm2.Maximum cross section of four branching conductors is 6mm2.

CURRENT MODULAR CLAMP FRS

It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.

Cross section of main conductor is 4-35mm2 and cross section of branching conductor is also 4-35mm2.

CURRENT MODULAR CLAMP MRS 4-16

It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.

Cross section of main conductor is 4-16mm2 and cross section of branching conductor is also 4-16mm2.