Tools
RSSPosts: 44
UNIVERSAL ROLLERS FOR LAYING CABLES
Use for laying cables along a route. By using these universal rollers time is saved and possible damage to the cables is avoided. The roller is made of silumine and the base of steel material, while the anti-corrosion protection is
by plastification. These universal rollers are of such construction that they permit the connection of additional rollers for angle turns of the cables and the bridging of trenches and ditches on the terrain. By connecting in this way it is possible to make a roller chain of unlimited length.
The steel rod used for joining and fastening the rollers is ordered separately.
COME-ALONG FOR PULLING AERIAL CABLES 7-15
Device serves for pulling non-insulated aerial cables of external diameter of 7 to 15 mm.
One end of the device is fixed to a pole, facade or similar immobile object. By moving the handle, the lever system is activated by which two special grips alternately tighten and pull the cable, with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.
Maximum tightening force is 800 kg
AUTOMATIC GRIPPER 6-14
Intended for pulling and tightening Al and Al-steel cables of external diameter of 6 to 14 mm.
Its construction with a system of levers grips the cable and while pulling automatically increases the pulling force by tightening the grip on the cable, thus permitting a quick and secure connection for pulling and tightening.
Maximum tightening force is 400 kg This automatic gripper has a built-in U-joint which permits quick and easy connection to pulley devices.
Gripper is made of a special aluminum alloy.
AUTOMATIC GRIPPER FOR Al-Fe CABLES 8-24mm
Use for tightening Al-Fe cables of 8-24 mm diameter. Made of steel alloy, and tension pads are of Al alloy. If to be used for tightening
steel cables and ropes (which should be indicated when ordering) the tension pads will be made of steel.
Maximum tightening force is 2000 kg.
- Length: 270 mm
- Weight: 3.5 kg
- Code number: 1884120
PULLEY GEAR WITH WIRE ROPE
This device serves for pulling loads of up to 800 kg using a wire rope of 8.3 mm
diameter. One end of the device is attached to a pole, facade or other similar immobile object.
Moving the handle activates the lever system by which the cable is tightened with a constant pulling force of 60 daN.
Mounting and use of the device is quick and easy.
ELECTRICAL HOIST – WINCH
Device used for hoisting loads of up to 900 kg. Connects to 12V power supply so that it can be used in the field.
It also is supplied with a keyboard control for giving commands.
DEVICE FOR TIGHTENING CABLES AND HOISTING LOADS
Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 0.75 t and 3 t.
- Code number: 1885075 – for 0.75 t
- Code number: 1885300 – for 3 t
DEVICE FOR TIGHTENING AND HOISTING LOADS – to 250 kg
Device used for tightening aerial cables and hoisting loads. One end of the device is fixed to a pole, facade or similar immobile object, while the other end of the chain is attached to an automatic gripper. Mounting and use of this gear is quick and simple. Maximum tightening force is 250 kg.
Code number: 1885025
DIES FOR: HYDRAULIC CRIMPER FS – 240
Wire diameter mm² | 6 | 10 | 16 | 25 | 35 | 50 | 70 |
Code number of die for Cu gear | 1882006 | 1882010 | 1882016 | 1882025 | 1882035 | 1882050 | 1882070 |
Wire diameter mm² | 95 | 120 | 150 | 185 | 240 | ||
Code number of die for Cu gear | 1882095 | 1882120 | 1882150 | 1882185 | 1882240 | ||
Wire diameter mm² | 6 | 10 | 16 | 25 | 35 | 50 | 70 |
Code number of die for Al gear | – | – | 1881016 | 1881025 | 1881035 | 1881050 | 1881070 |
Wire diameter mm² | 95 | 120 | 150 | 185 | 240 | ||
Code number of die for Al gear | 1881095 | 1881120 | 1881150 | 1881185 | 1881240 | ||
Wire diameter mm² | 6 | 10 | 16 | 25 | 35 | 50 | 70 |
Code number of diefor forming Al sect. cable | – | – | – | – | 1882323 | 1882324 | 1882325 |
Wire diameter mm² | 95 | 120 | 150 | 185 | 240 | ||
Code number of diefor forming Al sect. cable | 1882326 | 1882327 | 1882328 | 1882329 | 1882330 | ||
Wire diameter mm² | 6 | 10 | 16 | 25 | 35 | 50 | 70 |
Code number of diefor forming Cu sect. cable | – | – | – | – | 1882303 | 1882304 | 1882305 |
Wire diameter mm | 95 | 120 | 150 | 185 | 240 | ||
Code number of diefor forming Cu sect. cable | 1882306 | 1882307 | 1882308 | 1882309 | 1882310 |
DIES FOR CRIMPER FP – 185
Wire diameter mm² | 10 | 16 | 25 | 35 | 50 | 70 | 95 |
Code number of die for Cu gear | 1801860 | 1801861 | 1801862 | 1801863 | 1801864 | 1801865 | 1801866 |
Wire diameter mm² | 120 | 150 | 185 | ||||
Code number of die for Cu gear | 1801867 | 1801868 | 1801869 | ||||
Wire diameter mm² | 10 | 16 | 25 | 35 | 50 | 70 | 95 |
Code number of die for Al gear | 1801885 | 1801870 | 1801871 | 1801872 | 1801873 | 1801874 | 1801876 |
Wire diameter mm² | 120 | 150 | 185 | ||||
Code number of die for Al gear | – | – | – | ||||
Wire diameter mm² | 10 | 16 | 25 | 35 | 50 | 70 | 95 |
Code number of die for threaded connector | – | – | 1801880 | 1801881 | 1801882 | 1801883 | 1801884 |
Wire Diameter mm² | 120 | 150 | 185 | ||||
Code number of die for threaded connector | – | – | – | ||||
Wire diameter mm² | 10 | 16 | 25 | 35 | 50 | 70 | 95 |
Code number of die for forming sect. cable | – | – | – | 1801891 | 1801892 | 1801893 | 1801894 |
Wire diameter mm² | 120 | 150 | 185 | ||||
Code number of die for forming sect. cable | 1801895 | 1801896 | 1801897 | ||||
Wire diameter mm² | 10 | 16 | 25 | 35 | 50 | 70 | 95 |
Code number of die for FID sleeves | 1801886 | 1801886 | 1801886 | 1801886 | 1801888 | 1801888 | – |
Wire diameter mm² | 120 | 150 | 185 | ||||
Code number of die for FID sleeves | – | – | – |