Tools
RSSPosts: 44
HYDRAULIC CUTTER FHMC
Use for cutting of rebar, rods and Al-Steel cables of ø4-ø22. For power use either hydraulic or electrical pump.
Code number | Designation | Diameter | Lenght m | Weight kg/ea |
1883016 | FHMC-16 | ∅ 4-16 | 240 | 2.10 |
1883022 | FHMC-22 | ∅ 4-22 | 300 | 3.50 |
MANUAL HYDRAULIC CABLE CUTTER
Compact cutter with built-in high pressure hydraulic pump. Intended for cutting Al and Cu cables. The head rotates 360 degrees, permitting easy handling in every possible position.
Code number | Designation | ∅ blade for Al & Cu | ∅ blade for tel cable | Lenght mm | Weight of head kg/ea | Weight of case kg/ea. |
1870390 | FRHM-40 | 32 | 40 | 570 | 5 | 3.25 |
1870395 | FRHM-52 | 45 | 50 | 615 | 7 | 3.5 |
MANUAL HYDRAULIC CRIMPER – FRHP-300
A compact crimper with built-in hydraulic pump with high pressure of 700 bars. Use for crimping cable gear for Cu wires of 10 – 300 mm, and Al wires of 10 – 240 mm, threaded connectors, forming sector cable and for FID sleeves. The head of the crimper rotates 360 degrees, permitting crimping in all positions.
- Length: 460 mm
- Weight: 3.3 kg
- Code number: 1870291
Code number | Name of set |
1870296 | Sheet metal carrying case for FRHHP-300 and dies |
1870292 | Set FRHP-300 K1 (with crimper FRHP-300, carrying case, and dies: Al, Cu and for threaded connectors |
1870293 | Set FRHP-300 K2 (with crimper FRHP-300, carrying case, and dies Al 16-24 and Cu 10-300) |
1870294 | Set FRHP-300 K3 (with crimper FRHP-300, carrying case, and dies for Al. |
1870295 | Set FRHP[-300 K4 (with crimper FRHP-300, carrying case, and dies for Cu. |
MANUAL HYDRAULIC CRIMPER – FTP-300
Intended for pierced crimping of Al and Cu connection gear. Works in all positions. Use changeable dies for diameters of 16 to 300 mm². Obtains a pressure of 20 t.
- Length of crimper: 700 mm
- Weight of crimper: 5.5 kg
- Code number of crimper: 1870312
Code number | For crimping Cu terminations mm² | For crimping Al terminations mm² |
1870320 | 6-35 | 10-16 |
1870330 | 50-70 | 25-50 |
1870340 | 95-185 | 70-120 |
1870350 | 240-300 | 150-240 |
HYDRAULIC HOLE PUNCH HEAD – FAP-10
This hydraulic head is intended for punching holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. Using FAP-10 saves time and obtains great precision, quality and esthetic appearance. With hydraulic head FAP-10 sheet metal to a thickness of 2.5 mm can be cut. To power this hydraulic head use FEMAN hydraulic pump FKPU-700D (pg.58), which like the dies, is ordered separately.
COFFRET A OUTILS
Code number | Name of set | Weight kg |
1800010 | Manual tool for punching sheet metal – set (tools Pg11 – Pg 36) | 1.70 |
1850100 | Hydraulic tool for punching sheet metal – set (hydraulic head, carrying case with set of tools and pump | 21.01 |
1850101 | Hydraulic tool for punching sheet metal(hydraulic head, carrying case with tools Pg 9- Pg 48) | 10.81 |
1850105 | Carrying case for tools for punching sheet metal | 1.31 |
MANUAL MECHANICAL CRIMPER – FP-185
Universal, thanks to its construction. Accepts dies for: Cu and Al connecting gear, threaded connectors, FID sleeves and for forming sector
cables. The die head turns 360 degrees, permitting easy handling in any position. The telescoping handle extend from 600 to 860 mm. Practical for work in trenches, cabinets, on poles and everywhere that is difficult to approach.
- Length: 590mm
- Weight: 2.5 kg
- Code number: 1801850
Code number | Name of set | Weight kg |
1801859 | Carrying case for crimper FP-185 and dies | 4.90 |
1801851 | Set FP-185 K1 (crimper FP-185 with dies for Al, Cu, threaded connectors andcarrying case | 9.65 |
1801852 | Set FP-185 K2 (crimper FP-185 with dies for Al, Cu and carrying case | 8.85 |
1801853 | Dies for crimper FP-185 Cu set (10-185 mm²) | 0.80 |
1801854 | Dies for crimper FP-185 Al set (16-185 mm²) | 0.65 |
1801855 | Dies for crimper FP-185 threaded connectors set (25-95 mm²) | 0.80 |
1801856 | Dies for crimper FP-185 for forming sector cable set | 1.85 |
The carrying case is for packing the crimper with the set of dies and is made of sheet steel with divisions to hold the dies and the crimper. Has a carrying handle. The dimensions of the case are 60 x 610 x 300 mm
MANUAL MECHANICAL CRIMPER – FRP-300C
This crimper was developed on the basis of the perfection of FEMAN’s manual mechanical crimpers, so that today it counts as the best manual mechanical crimper. The head of the crimper turns 360°, permitting crimping in all positions. The
handles telescope, extending from 600 to 800 mm and depending on the length of the rod, significantly reduces the amount of pressure the installer needs to use on the handle during crimping.
The handles are extended for work with larger diameters, and for smaller ones the standard handle length is sufficient.
The crimper and crimping dies are packed in an appropriate metal carrying case.
- Length: 510 mm
- Weight: 8.04 kg
- Code number: 1800299
Code number | Name of set |
1800305 | Metal case for crimper FRP-300 C and dies |
1800301 | Set FRP-300 C K1 (with crimper FRP-300 C and dies for Al, Cu and for threaded connectors) |
1800302 | Set FRP-300 C K2 (with crimper FRP-300 C, case and dies for Al 16-240 and Cu 10-300) |
1800303 | Set FRP-300 C K3 (with crimper FRP-300 C, case and dies for Al) |
1800304 | Set FRP-300 C K4 (with crimper FRP-300 C, case and dies for Cu) |
MANUAL CUTTERS FOR Al AND Cu CABLES
Angle cutting with these cutters is appropriate for cutting aluminum and copper cables. Cutting of Al-steel ropes is forbidden for it would cause permanent damage to the blades.
Code number | Designation | ∅ cable mm | Lenght mm | Weight kg |
1800040 | FM-40 | 28 | 700 | 3.20 |
1800450 | FLK-450 | 25 | 470 | 1.75 |
1801325 | FLK-325 | 40 | 1126 | 4.36 |
MANUAL REBAR CUTTER – FMA-800
Rebar cutter is used in construction for the cutting of iron for armatures. Made of very high quality steel with blades set so that they can be reversed which significantly extends the life of the cutter. It is intended for cutting soft rebar of up to ø10 in diameter, and hard rebar of up to ø8 in diameter.
MANUAL HOLE CUTTER – FRAP-60 (SET)
This tool is intended for making holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. Using FRAP-60 saves time, obtains great precision, quality and esthetic appearance. With the FRAP-60 tool sheet metal to a thickness of 2mm can be cut.
The FRAP-60 set contains: Round punches: ø22; ø27.5; ø34.3; ø43; ø49; ø60.8; small shaft, large shaft, driver and plastic carrying case.