CUTTER FOR REMOVING CABLE INSULATION AND SEMI-CONDUCTOR SHEATHING – FNSP-40

Use for removing insulation from the ends of cables and semi-conductor sheathing of from ø20 to ø40mm. Includes a hex wrench for regulating the depth of the cut. Note: The blade is not intended for cutting of mechanically protected cables.

• Length: 250 mm
• Weight: 0.80 kg
• Code number: 1850340

STRIPPER DEVICE

HOB STRIPPER FLY-5274

Use for stripping wires of 0.75-6 mm². Includes an addition for pierced crimping.

• Length: 215 mm
• Weight: 0.27 kg/ea.
• Code number: 1520527

STRIPPER FOR REMOVING SHEATHING FLY-700 B

Use for stripping insulation from wires of 0.75-4 mm² diameter.

• Length: 175 mm
• Weight: 0.36 kg/ea.
• Code number: 1520710

UNIVERSAL WIRE STRIPPER FLY-700 D

Use for stripping of wires of 0.2-8 mm², with a stripping length regulator of up to 25 mm. Includes an addition for wire cutting.

• Length: 175 mm
• Weight: 0.20 kg/ea.
• Code number: 1520700

STRIPPER FOR COAXIAL CABLE FHT-320

Use to remove sheath from coaxial cables (RG 58, RG 59 and RF 75). Along with the stripper is supplied a hex wrench which regulates the depth of the cut to the sheathing. The stripper has two blades that permit the independent removal of the external and internal coat.

• Length: 105 mm
• Weight: 0.06 kg/ea.
• Code number: 1520302

AUTOMATIC TIE GUN FLY-600 L

Use to tighten ties of widths up to 13 mm when wrapping and placing cable bundles.

Has the possibility of regulating the jaw force, which permits the cutting off of the extra tie after reaching the indicated force.

• Length: 225 mm
• Weight: 0.32 kg/ea.
• Code number: 1550613

UNIVERSAL KNIFE FOR STRIPPING SHEATH FLY-25-6

Use to remove sheathing from cables of diameter up to ø28mm. The bolt in the lower part of the knife regulates, depending on the diameter of the cable.

• Length: 185 mm
• Weight: 0.10 kg/ea.
• Code number: 1520026

UNIVERSAL PLIERS FOR LEAD SEALS

Use for protection (lead seal) of metering groups, but also for all other locations where it is necessary to protect equipment from unauthorized opening.

• Length: 175 mm
• Weight: 0.46 kg/ea.
• Code number: 1500300

TIE GUN – FLY-600

Use to tighten ties up to 5mm in width while wrapping and placing cables. Has the option of regulating the jaw force, which permits the cutting off of
the extra tie after reaching the designated force.

• Length: 165 mm
• Weight: 0.24 kg/ea.
• Code number: 1550600

CUTTER DEVICE

CABLE CUTTER FLK-325 A

Use for cutting Al and Cu cables without steel covering up to 185 mm²

• Length: 265 mm
• Weight: 0.63 kg/ea.
• Code number: 1510325

CABLE CUTTER (LARGER) FLK-60A

Use for cutting of aluminum and copper wires of up to 50mm².

• Length: 235 mm
• Weight: 0.48 kg/ea.
• Code number: 1510060

ELECTRONICS WIRE CUTTER FLY-109

Use for telephone and electronics for shortening small diameter wires – up to ø 1 mm.

• Length: 125 mm
• Weight: 0.05 kg/ea.
• Code number: 1510109

STRANDED WIRE CUTTERS FLY-206

Use for cutting flexible wires of small diameter up to ø 18 mm.

• Length: 165 mm
• Weight: 0.14 kg/ea.
• Code number: 1510206

CRIMPING DEVICE

MANUAL AUTOMATIC CRIMPER FLY-03C

Use for hexagonal crimping of insulated cable terminals (groups 10, 11,12, 14 and 16) of 05-6mm²
diameter.
The crimper is automatic, meaning that it unlocks only when the crimp is finished, which secures a quality connection.
We recommend this type of crimper for professional use.

• Length: 235 mm
• Weight: 0.55 kg/ea.
• Code number: 1500004

AUTOMATIC CRIMPER FLY-03B

Use for hexagonal crimping of open, non-insulated cable terminals (group 16) of diameter – 6mm². Crimper is auto- matic, meaning that it unlocks only when the crimp is finished, which secures a quality connection. We recommend this type of crimper for professional use.

• Length: 235 mm
• Weight: 0.53 kg/ea.
• Code number: 1500003

MANUAL CRIMPER RMK-10

Use for crimping insulated cable terminals (groups 10, 11, 12, 14, and 16) of 0.75-6 mm² diameter. There is the possibility of regulating the crimping pressure with this crimper. There are also built-in additions for stripping and cutting wires of 0.75-6 mm², and because of this, we recommend it for installers.

PIG-TAIL CRIMPER 0.5-6mm²FYS-02C0

Use for crimping insulated pig-tails of 0.5-6 mm², stripping and cutting wires, pierced crimping of 1.5-6 mm², as well as cutting bolts M2.5, M3, M3.5, M4 and M5.

• Length: 250 mm
• Weight: 0.38 kg/ea.
• Code number: 1550702

MANUAL CRIMPER FKH-16

Use for crimping non-insulated copper terminals (FPG &FCPCu and sleeves of 2-16 mm diameter.

• Length: 275 mm
• Weight: 0.47 kg/ea
• Code number: 1500016

PIG-TAIL SET WITH UNIVERSAL CRIMPER FYS-02C0

Crimper used for crimping insulated pig-tail terminals of 0.5-6 mm², stripping and wire cutting, and for pierced crimping of diameters of 1.5-6 mm², as well as for bolt cutting of M2.5, M3, M3.5, M4 and M5. In addition to the crimper, the set includes 650 insulated pig-tail terminals of 0.5-6 mm² diameters.

• Length: 260mm
• Weight: 0.56 kg/ea.
• Code number: 1550701

MANUAL CRIMPER FOR NON-INSULATED TERMINALS FYS-02BM

Use for crimping open non-insulated terminals of 0.5-2.5 mm², pierced crimping of 1.5-6 mm², stripping and cutting of wires of 0.75-6 mm², and bolt cutting. Along with the crimper comes a limiter for various types of terminals.

• Length: 250 mm
• Weight: 0.37 kg/ea.
• Code number: 1500205

CRIMPER AND SET OF TELEPHONE CONNECTORS (UTP) FHT-210A

Use for crimping UTP connectors. Crimper can also cut and strip wires.

• Length: 210 mm
• Weight: 0.30 kg/ea.
• Code number: 1500210

MANUAL CRIMPER FRC-102

Universal hob crimper is used for crimping insulated terminals 0.75-6 mm², stripping and cutting of wires of 0.75-6 mm², and for cutting bolts.

• Length: 200 mm
• Weight: 0.2 kg/ea.
• Code number: 1500102