Tools
RSSPosts: 44
HYDRAULIC HOLE CUTTER – FHPP-60
Intended for cutting holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. Using FHPP-60 saves time and obtains great precision, quality and esthetic appearance. With FHPP-60 sheet metal to a thickness of 2 mm can be cut.
Set includes:
- Hydraulic mini pump FHPP-180
- Hydraulic hole cutter FHPP-60
- Sheet metal carrying case
- Punches: ø22m ø27.5, ø34.3, ø43, ø49 and ø60.8 mm
- Weight of set: 16 kg
- Code number: 1850081
MANUAL HYDRAULIC HOLE CUTTER – FRHPP-60
This manual hydraulic head with built-in high pressure hydraulic pump is intended for making holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. With FRHPP-60 sheet metal to a thickness of 2mm can be cut. Its use saves time and obtains great precision, quality and esthetic appearance. Comes in a case with punches of ø22, ø27.5, ø34.3, ø43, ø49, and ø60.8.
HYDRAULIC RAIL CUTTER – FHAS-150
Intended for cutting Al and Cu rails of a maximum width of 150mm and thickness of 10mm. The use of FHAS 150 saves time, and obtains great precision, quality and esthetic appearance. For power use manual, pedal or electrical hydraulic pump, which is ordered separately.
HYDRAULIC PRESS – FPS-200
Use for bending Al and Cu distribution rails to angles up to 90°. Can bend rails up to a maximum width of 200 mm and thickness to 15 mm. Very convenient for work in the field. To power this hydraulic head use FEMAN hydraulic pump FKPU-700D, which is ordered separately.
HYDRAULIC DRILL PRESS FPB-20
Hydraulic press for punching Al and Cu rails of up to 15 mm thickness. Hole range is ø6-25mm. Working pressure is 700 bars, and for power use a hydraulic or electrical pump, which is ordered separately. When ordering, give the desired punch diameter.
- Dimensions: 372×280 mm
- Weight: 16 kg/ea.
- Code number for FPB-20: 1860200
- Code number for FPB-20 K1 (FPB-20
- with tools ø6-25 mm): 1860202
HYDRAULIC CABLE CUTTER FHM-50
Intended for cutting Al and Cu cables of ø50mm maximum diameter. The hydraulic cutter is attached to a hydraulic or an electrical pump, which is ordered separately. For power use an electrical pump or a manual-pedal hydraulic pump.
HYDRAULIC CRIMPER – FF-400
This crimper was developed for the purposes of the railroad, but it also can
be used for hexagonal crimped connections of all types of wires up to 240mm² in diameter. A crimper with this construction of the head can develop a force of 30 t. The crimper consists of a high pressure pump, a high pressure tube, (which joins the body of the crimper with the crimping unit, the hydraulic head for crimping and the tools. The crimper tools that are placed in the hydraulic head for crimping are two-part and work in the following variations:
- Pressing tool for fastening clamps for extending contact wires
- Tool for disconnecting clamps for extending contact wires
- Tool for crimping clamps for joining contact wire and support cable
- Tool for disconnecting contact wire from clamp and support cable
- Tool for hexagonal crimping of connector sleeves for extending support cables
- Tool for cutting contact wire and support cable
- Dimensions: 820 x 200 x 140mm
- Length of high pressure tubing: 2m
- Weight of set: 16.5 kg
- Code number: 18844000
HYDRAULIC HEAD FOR CRIMPING – FCO-630
Hydraulic head is intended for hexagonal compression of Al and Cu joining gear of larger dimensions 50-630 mm². For power to this hydraulic crimper use FEMAN hydraulic pump FKPU-700D, which is ordered separately. Changeable tools for hexagonal crimping work for Al and Cu of 50-630 mm². This hydraulic head with dies for 35, 50 and 70 mm² is used for crimping stainless steel sleeves when joining the support cable for a mid-voltage cable bundle.
- Dimensions: 360×160 mm
- Weight: 16 kg/ea.
- Code number: 1850630
Code number | Name of set | Weight kg |
1850632 | Carrying case for crimper FCO-630 and dies | 6.20 |
1850634 | Set of dies for FCO-630 – STANDARD (Al 300, 400, 500, 630 and Cu 300, 400, 500, 630) | 12.92 |
BOLT CUTTER
Use for cutting bolts. Cutting power is 16t. Width of cut is 20mm. For power use either hydraulic or electrical pump.
Code number | Designation | Dimension | Weight kg/ea |
1883116 | FYP-24 | M12-M16 | 1.60 kg |
1883127 | FYP-41 | M22-M27 | 4.50 kg |
HYDRAULIC CABLE CUTTER
Intended for cutting of telephone, Al and Cu cables. For power for this hydraulic cable cutter use either a hydraulic or electrical pump.
Code number | Designation | Telephone/Al-Cu cable mm | Lenght mm | Weight of case kg/es |
1870397 | FHM-85B | ∅85/∅50 | 465 | 8.20 |
1870398 | FHM-100B | ∅100/∅75 | 515 | 8.70 |