INSTALLATION AND CONNECTION ACCESORIES

RSS
Posts: 65

ELBOWS FOR FIN CONDUIT

 

These elbows are used to change the direction of the conduits. They are made of hard, smooth-finished, gray (RAL 7035) PVC. Extension and installation of FIN conduits with FIN elbows is fast, easy, reliable and simple.

ELBOWS FOR FIN CONDUIT

Code number For fin condult ∅ intern./∅ extern. mm package pcs Weight kg/100pcs
5315009 Pg 9 15,2/17,6 50 1,1
5315110 Pg 11 18,6/21 50 1,4
5315130 Pg 13,5 20,4/23,1 50 3
5315160 Pg 16 22,5/25,4 50 4
5315210 Pg 21 28,3/31,5 50 7,5
5315290 Pg 29 37/40,2 25 12,2
5315360 Pg 36 47/51,1 25 21
5340416 M – 16 16/18,7 50 1,2
5340420 M – 20 20/22,9 50 1,8
5340425 M – 25 25/27,9 50 2,8
5340432 M – 32 32/35 25 3,2
5340440 M – 40 40/43,5 25 3,9

 

ADAPTERS FOR FIN CONDUIT

 

These adapters are used for extending FIN on-wall installation conduit. They are made of hard, smooth-finished, gray (RAL 7035) PVC. Extension and installation of FIN conduits with FIN adapters is fast, easy, reliable and simple.

ADAPTERS FOR FIN CONDUIT

Code number For FIN condult ∅ intern./ ∅ extern. mm Package pcs Weight kg/100pcs
5310109 Pg 9 15,2/17,6 50 6,8
5310110 Pg 11 18,6/21 50 7,5
5310130 Pg 13,5 20,4/23,1 50 8
5310160 Pg 16 22,5/25,4 50 9,6
5310210 Pg 21 28,3/31,5 50 13,5
5310290 Pg 29 37/40,2 25 29
5310360 Pg 36 47/51,1 25 30
5340516 M – 16 16/18,7 50 0,6
5340520 M – 20 20/22,9 50 0,8
5340525 M – 25 25/27,9 50 1,2
5340532 M – 32 32/35 50 1,4
5340540 M – 40 40/43,5 50 1,6

 

FEPO HANGERS

 

FEPO hangers are used for on-wall electrical installations using FIN conduit. They are made of a special thermoplastic material and can be attached to each other in series.

FEPO HANGERS

Code number For FIN condult Opening diameter mm Package pcs Weight kg/100pcs
5340011 Pg 11 18,6 100 0,60
5340013 Pg 13,5 20,4 100 0,70
5340016 Pg 16 22,5 100 0,80
5340021 Pg 21 28,3 100 1,00
5340029 Pg 29 37 50 1,3
5340036 Pg 36 47 25 1,5
5340042 Pg 42 54 25 1,7
5340048 Pg 48 59,5 25 2
5340316 M – 16 16 100 0,5
5340320 M – 20 20 100 0,7
5340325 M – 25 25 100 0,9
5340332 M – 32 32 50 1,2
5340340 M – 40 40 50 1,4

11-32-300x226 11-5-300x225

11-42-300x300

ON-WALL INSTALLATION CONDUIT – FIN

 

FIN conduit is made of hard, self-extinguishable, smooth PVC in gray RAL 7035 tone . Used in stead of spaced support rings for contemporary installation of all types of electrical, TT, signalization and other on-wall installations. Installations with FIN conduit are tidy, elegant and economical, easy and time saving. It is well suited for moist areas. Bending to the desired angle is performed with a special spring which is inserted into the desired location, and then removed after the bending is finished. FEMAN also produces a special tool for widening the bending location.

10-6 10-5 10-4 10-3

Code number Type ∅ intern./ ∅ extern. mm Lenght m Package pcs Weight kg/100pcs
5300109 Pg 9 12,6/15,2 3 25 25
5300110 Pg 11 16/18,6 3 25 36
5300130 Pg 13,5 17,5/20,4 3 25 39,8
5300160 Pg 16 19,4/22,5 3 20 47,6
5300210 Pg 21 24,9/28,3 3 20 65
5300290 Pg 29 33,6/37 3 20 87
5300360 Pg 36 42,8/47 3 20 135
5300016 M – 16 13,3/16 3 25 27,6
5300020 M – 20 17,1/20 3 25 37,5
5300025 M – 25 22,1/25 3 20 47,6
5300032 M – 32 29/32 3 20 63,8
5300040 M – 40 36,5/40 3 20 93,3

10-2

SLOTTED PVC CABLE RACEWAYS

SLOTTED PVC CABLE RACEWAYS

Slotted PVC cable raceways are very convenient for cable laying of on-wall installations in offices, laboratories, workshops etc. They facilitate easy installation procedure, swift replacement in case of damages and malfunction and supplementary cable laying. They can secure good mechanical protection for electrical lines. They assure good visibility and give a good esthetic look. They can be installed on every surface, horizontally and vertically. They are very stable and very resistant to chemicals. The sides have cut-outs which can be useful for branching of electrical lines and attaching them to various elements. The sizes of openings are regulated by removing one or more ridges on the sides of the raceways. Raceways are made of very hard, self-extinguishing PVC, with temperature resistance to 70 Co. We standardly produce them in white and grey colors, but customers demand we can produce them in any other color.

 

            Code number                white                              grey A x B mm Lenght mm Package pcs Weight kg/pc
5063040 5063041 30 x 40 2000 25 0.60
5063060 5063061 30 x 60 2000 20 0.70
5064040 5064041 40 x 40 2000 20 0.65
5064060 5064061 40 x 60 2000 20 0.90
5066040 5066041 60 x 40 2000 20 0.88
5066060 5066061 60 x 60 2000 16 1.14
5066120 5066121 60 x 120 2000 10 1.92

SLOTTED PVC CABLE RACEWAYS SLOTTED PVC CABLE RACEWAYS

CLOSED ON-WALL PVC RACEWAY

 

Code number For cable mm² Length mm Package pcs Weight kg/pcs
5000315 3 x 1.5 2000 50 13.6
5000325 3 x 2.5 2000 50 17
5000525 5 x 2.5 2000 50 20.6

CLOSED ON-WALL PVC RACEWAYCLOSED ON-WALL PVC RACEWAY

CLOSED PVC CABLE RACEWAYS

 

Used for contemporaneously cable laying of all kinds of electrical, phone, signal cables and other wire installations on the wall. They A facilitate easy installation, swift replacement in case of damages and malfunction and supplementary cable laying. Closed PVC cable raceways give a good mechanical protection of electrical lines. They can enable good visibility and give a good esthetic look. They are very stable and very resistant to chemicals. They can be installed on every surface, horizontally and vertically. Branching of the raceways is done by cutting the sides towards the dimension of seperative raceway, and during angled turning, the endings of the raceways are adjusted by cutting, to needed angles. The shutter panel is attached from the upper side, without the use of any tools. The endings of raceways can be closed with the same shutter panel. At the end of the shutter panel, cut of the sides appropriate to the length of the height of the raceway and then heat the specific point of bending and make the shaping adjustments. Raceway 30×10 is intended for installations of phone, electrical and computer wiring in offices, laboratories, workshops etc. It has a longitudinal compartment and with its design can fit into every interior design. Construction of the raceways assures very neat handling of phone and computer lines with energy lines. Raceways are made of very hard, self-extinguishing PVC, temperature resistant to 70 Co.

CLOSED PVC CABLE RACEWAYSCLOSED PVC CABLE RACEWAYS

Code number

white              Grey

A x Bmm Lenght mm Package pcs Weight kg/pc
5003017 5003018 17 x 17 2000 50 0,28
5003010 5003011 30 x 10 2000 50 0,42
5003020 5003021 30 x 20 2000 50 0,47
5003040 5003041 30 x 40 2000 25 0,63
5003060 5003061 30 x 60 2000 20 0,82
5004040 5004041 40 x 40 2000 20 0,74
5004060 5004061 40 x 60 2000 20 1,03
5006040 5006041 60 x 40 2000 20 0,94
5006060 5006061 60 x 60 2000 15 1,22
5006120 5005121 60 x 120 2000 10 2,06

 

CLOSED PVC CABLE RACEWAYS

 

Made of soft plastic, in white color, with imprinted non-fading black lettering. Labels are flat and the numbers run from 0-99. Delivered in spool cases which can be connected to each other. When ordering, be sure to indicate which labels you are ordering and in what quantities.

 

  • Package: 100×10
  • Weight: 0,110 4 kg/pcs CLOSED PVC CABLE RACEWAYS
  • Code number: 5000190

NUMBERS AND LETTERS FOR LABELING CABLES

NUMBERS AND LETTERS FOR LABELING CABLES

Made of soft plastic, in yellow (orange) with imprinted, non-fading black lettering. They are round with teeth which prevent them from moving. Numbers run from 0-99, for cables 0, 75- 6 mm2 in diameter (at the customers request, we can make them for larger diameters). Delivered in spool cases which can be connected to each other, also in small plastic bags according to the needs and use. When ordering, indicate quantities and designation of cable.

 

 

                 Code number75-4                               4-10  Designation Package pcs Weight kg/10 pcs
 1721001  1741001  1  50  0,15
 1721002  1741002  2  50  0,15
  1721003  1741003  3  50  0,15
  1721004  1741004  4  50  0,15
  1721005  1741005  5  50  0,15
  1721006  1741006  6  50  0,15
  1721007  1741007  7  50  0,15
  1721008  1741008  8  50  0,15
  1721009  1741009  9  50  0,15
  1721010  1741010  0  50  0,15
  1721011  1741011  A  50  0,15
  1721012  1741012  B  50  0,15
  1721013 1741013  C  50  0,15
  1721014  1741014  D  50  0,15
  1721015  1741015  E  50  0,15
  1721016  1741016  F  50  0,15
  1721017  1741017  G  50 0,15
 1721018  1741018  H  50  0,15
  1721019  1741019  I  50  0,15
  1721020 1741020  J  50  0,15
  1721021  1741021  K  50  0,15
  1721022  1741022  L  50  0,15
  1721023  1741023  M  50  0,15
  1721024  1741024  N  50  0,15
  1721025  1741025  O  50  0,15
  1721026  1741026  P  50  0,15
  1721027  1741027  Q  50  0,15
  1721028  1741028  R  50  0,15
  1721029  1741029  S  50  0,15
  1721030  1741030  T  50  0,15
  1721031  1741031  U  50  0,15
  1721032  1741032  V  50  0,15
  1721033  1741033  W  50  0,15
  1721034  1741034  X  50  0,15
  1721035 1741035  Y  50  0,15
  1721036  1741036  Z  50  0,15
  1721037  1741037  +  50  0,15
  1721038  1741038  –  50  0,15

 

TERMINAL BLOCK FOR GROUNDING

 

 

Construction is designed so that metal teeth (connection with rail) are at the same time used as a connection of the block and the grounding.

TERMINAL BLOCK FOR GROUNDING TERMINAL BLOCK FOR GROUNDING

Code number Designation mm² Dimensions AxBxC Package pcs Mass kg/100pcs
5000072 FKU 2.5 24x55x7.5 100 1.0
5000076 FKU 6 24x55x8.5 100 1.3
5000078 FKU 16 28.5x55x11.5 50 2.4

 

Page 6 of 7« First...«34567»
2021 © Feman Jagodina