Lighting
RSSPosts: 43
HALOGEN REFLECTOR WITH SENSOR
DESCRIPTION
This halogen reflector with sensor has the following construction.
The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions.
The light beam is wide and equally distributed, so that the energy expended is used to the maximum. Adjustable to all positions as desired. Voltage is 220 V. Reflector with built-in automatic IR light sensor for switching on, with photo-cell time-clock for lighting, is ideal for an alarm.
All these characteristics make this reflector suitable for a wide spectrum of both exterior and interior installation, but it is most often used for illuminating entrances, displays, hallways, facades, monuments, etc.
Code number | Type | Power W |
3900210 | with sensor, without bulb | – |
3900213 | with sensor and bulb | 300 |
3900215 | with sensor and bulb | 500 |
OG LAMP
CONNECTION PLATE FOR PUBLIC LIGHTING POLES PPROV III
Made of special polyester resin. Installed in larger dimension public lighting poles and for larger diameter feeder cables.
Specifications: Rated voltage: 450 V
Rated fuse current: max 16A Number of fuses: 2
Number of connection wires: 4 Temperature range: -50 to 130 C
Code number: 2900383
CONNECTION PLATE FOR PUBLIC LIGHTING POLES PPR4
Made of special polyester resin. Installed in poles for public lighting.
Specifications: Rated voltage: 450 V
Rated fuse current: max 16 A Number of fuses: 2
Number of connection wires: 4 Temperature range: -50 to 130 C
Code number: 39003874
CIRCUIT BOXES FOR PUBLIC LIGHTING
Circuit boxes for public lighting are made of pressedpolyester reinforced with fiberglass. Resistant to both static and dynamic loads, UV radiation and self-extinguishing, they have a great dielectric strength. At the customer’s request we can make them in protection degrees of IP44, IP54 or Ip65. For detailed information, see our general catalog.
SEGMENTAL TUBULAR STEEL POLES
Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : – those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.
Code number | Height H (m) | ho(mm) | ∅XS | ∅XS | ∅XS |
39005100 | 10 | 800 | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 |
39005200 | 10 | – | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 |
Code number | Height H (m) | Mass (kg) | Anchor M | Type of foundation | Anchor plate (a) | Anchor L (mm) |
39005100 | 10 | 154 | – | 6 | – | – |
39005200 | 10 | 146 | 20 | 6 | 400 | 600 |
SEGMENTAL TUBULAR STEEL POLES
Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : – those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.
Code number | Height H (m) | h0 (mm) | ∅ XS (mm mm) | ∅ XS (mm mm) | ∅ XS (mm mm) | Surface (m²) | Masa (kg) | Type of foundation |
3905070 | 7 | 700 | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 | 3,8 | 127 | 1 |
3905071 | 7 | 700 | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 | 4,5 | 169 | 6 |
3905080 | 8 | 700 | 133 x 4,0 | 159 x 4,5 | 193,7 x 5,4 | 4,1 | 136 | 2 |
3905081 | 8 | 700 | 133 x 4,0 | 149 x 4,5 | 193,7 x 5,4 | 5,0 | 179 | 3 |
3905170 | 7 | – | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 | 4,0 | 136 | 1 |
3905171 | 7 | – | 108 x 3,6 | 133 x 4,0 | 159 x 4,5 | 4,5 | 180 | 6 |
3905180 | 8 | – | 133 x 4,0 | 159 x 4,5 | 193,7 x 5,4 | 4,1 | 146 | 2 |
3905181 | 8 | – | 133 x 4,0 | 159 x 4,5 | 193,7 x 5,4 | 5,0 | 190 | 3 |
SEGMENTAL TUBULAR STEEL POLES
Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.
Code number | Height H (m) | Surface (m²) | Mass (kg) | Type of foundation |
3905030 | 3,0 | 1,55 | 45 | 12 |
3905035 | 3,5 | 1,65 | 47 | 12 |
3905040 | 4,0 | 1,80 | 50 | 13 |
3905045 | 4,5 | 1,90 | 57 | 13 |
3905050 | 5,0 | 2,00 | 67 | 14 |
3905055 | 5,5 | 2,15 | 70 | 14 |
3905060 | 6,0 | 2,25 | 81 | 15 |
3905130 | 3,0 | 1,40 | 51 | 12 |
3905135 | 3,5 | 1,50 | 54 | 12 |
3905140 | 4,0 | 1,60 | 57 | 13 |
3905145 | 4,5 | 1,75 | 59 | 13 |
3905150 | 5,0 | 1,85 | 62 | 14 |
3905155 | 5,5 | 1,95 | 64 | 14 |
3905160 | 6,0 | 2,10 | 67 | 15 |
STEEL LAMP HOLDERS
Holder for street light 1 ½”
For binding on the pole. The binding is performed with stainless steel bands (page 57). The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number: 3900400
Holder for street light 1 ½”
Oblique without flange for top part of steel pole, (according to requests we can produce for concrete poles). The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number: 3900440
Holder for street light
Mounting is performed with brackets installed on the pole. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number | Pole (mm) | Diameter ∅mm |
3900406 | 120-130 | 48 |
3900407 | 120-130 | 60 |
3900408 | 200-250 | 48 |
3900409 | 200-250 | 60 |
Reducer for top part of steel pole Ø76/60 90º double The installation is performed on the top part of the pole by
screwing three screws. The surface is protected by using electro- static paints and according to the desire of the client it can be hot galvanized.
Code number: 3900403
Reducer for top part of steel pole Ø76/60 90º. The installation is performed on the top part of the pole by screwing three screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number: 3900402
Reducer for holder Ø76/60
Installation is performed on top of the pole by screwing three screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number: 3900404
STEEL LAMP HOLDERS
Aligning holders
For street lights on poles. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number | L mm |
3900450 | 500 |
3900451 | 1000 |
3900452 | 1500 |
Holder for street light 1 ½”
For wall mounting. The installation can be done with 4 screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Aligning holder under angle from 0-90º
For street lights, installation is performed on poles Ø48-76. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number 3900405
Holder for street light 1 ½”
With flanges for mounting on top of concrete poles. The installation can be done with 4 screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.
Code number 3900420
Holder Ø48-110º for poles 120-130
The mounting is performed by screwing the holder on the pole with two brackets at the bottom of the holder. The surface is protected by using electro-static paints and
Code number | Pole (mm) | Diametar ∅mm |
3900432 | 120-130 | 48 |
3900433 | 120-130 | 60 |
3900436 | 200-250 | 48 |
3900437 | 200-250 | 60 |
Holder for poles 1000/1500-95º
The mounting is performed by screwing the holder on the pole with two brackets at the bottom of the holder. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized
Code number 3900410