HALOGEN REFLECTOR 2000W

DESCRIPTION

Reflector can be installed either on a wall or a pole. The reflection surface, (rotationally msymmetric) is    made    of   quality    polished aluminum, making very shiny. The light beam is wide and equally distributed, so that the energy expenditure is used to the maximum. Adjustable   to    all   positions   as desired. The insulation degree of the lamp is IP54. The reflector is connected to a voltage network of 230V/400V. The recommended diameter of copper cable is 3×2,5 mm2.

Accompanying gear:

• Metal-halogen bulb 2000W
• Condenser 60µF ,400V

All these characteristics make this reflector suitable for a wide spectrum of usage, for both exterior and interior installation, but most often used for illuminating entrances and approaches to factory grounds, sports fields, stadiums, work-shops, displays, hallways, facades, etc.

RECESSED LIGHTS FOR INDIRECT LIGHTING – FUSIO

Represents a new concept in office lighting. Built into ceilings of 600 x 600. Its unique system of indirect lighting provides a comfortable and original space lighting. Made of steel sheet metal, painted in standard white color.

REFLECTOR for sports fields and industrial illumination

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside.
By using anodized, finely polished aluminum for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All   these   characteristics    make    this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways,  facades, monuments, parks, etc.

Technical data:

• Protection degree: IP 65
• Nominal voltage: 220~240V, 50Hz
• Installed power: 150W,400W E40
• Base: E40

REFLECTOR for lighting facades, smaller sports fields and large billboards

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.

Technical data:

Protection degree: IP 65

Nominal voltage: 220~249V, 50Hz Installed power 400W

Base: E40

REFLECTOR for lighting billboards, facades

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.

Technical data:

-Protection degree: IP 65

-Nominal voltage: 220~240V, 50Hz

-Installed power: 150W, 400W

-Base: RX7s

REFLECTOR for illuminating billboards, advertisements

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.

Technical data:

• Protection degree IP 65
• Nominal voltage 220~240V, 50 Hz
• Installed power 150W, 400W
• Base Rx7s

LED REFLECTOR

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.

Technical data:

• Installed power 30W
• Nominal voltage 220~240V, 50 Hz
• Protection degree IP 65
• Protection IK 08

PORTABLE FLOODLIGHT

Use for quick and simple lighting of desired areas. The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed, providing the most efficient use of energy. Supplied without bulb and wires.

FLOODLIGHT STANDS

Use for quick and simple lighting of desired areas. The lights can be raised to a height of 2800 mm, can be adjusted forward and back-ward, and can turn 360 degrees.

HALOGEN REFLECTOR

DESCRIPTION

Feman’s halogen reflectors are made to European standards.

The housing is of pressure cast silumine, and its construction is elaborated with ribs to diffuse heat. The surface protection of the housing is plasticized, making it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed so that the energy expenditure is used to the maximum. Adjustable to all positions as desired. All these characteristics make this reflector appropriate for a wide spectrum of applications for both exterior and interior installation, but most often is used to light entrances, displays, hallways, facades, monuments, etc.