MRO1 320x665x235 FREESTANDING BOXES WITH GROUND BASE

Freestanding box with ground base can be installed on polyester underground stands.

MRO1 320x665x235 SORT, USAGE AND EXAMPLES OF BOXES

They can be used as measuring, measuring – command, for public lighting, distribution, commanding boxes for automatic in facilities etc.

The interior of empty universal polyester box	Boxes switches and control lamps	Measuring boxes
Electricity measuring command boxes	Boxes with measuring devices	Boxes with automatics
Boxes with current transformers	Boxes with connection accessories	Interior of box with connection accessories

MRO1 320x665x235 TEHNICAL DESCRIPTION OF MODULAR- MEASURING AND DISTRIBUTION BOXES

These boxes are mainly used for one measuring device. In order to install more measuring devices, they can be installed beside the first one or one above each other.

This multipurpose modular universal box is made for montage on the pole, in the wall, on the wall, freestanding with ground base and freestanding with underground base.

It is made from pressed non- burning polyester, reinforced with glass fibers. It is resistant to strokes, bending and has high dialectical strength. Boxes are also resistant to weather conditions, as well as UV-rays. They have no harmful effect to the surroundings and can be completely recycled. They provide good mechanical and electrical protection and they fall under highly insulated boxes. By adding gasket rubber on doors, windows and other holes high degree of sealing IP 54 is achieved. For it’s good technical characteristics they can be used in wet rooms, ambiences with high presence of acid, dust or salt, power plants, rooms with high and low temperatures, industrial facilities etc. Usage is very simple and without additional maintenance. Usage and montage are very simplified. They count as highly sealed boxes.

In accordance with Europeans standards and norms we have developed wide range of additional equipment for boxes. At customer request we deliver boxes complete equipped according to technical instruction submitted by the customer.

CLIPS FOR STAINLESS STEEL BANDS

Used for attaching stainless steel bands to poles.

PULLING GRIP FOR STAINLESS STEEL BANDS FZT

Used for tightening and cutting of stainless steel bands (steel support rings) used for securing equipment to poles. This is a very reliable and practical way for quick and easy securing of brackets, stands, supports, lamps, protection devices, signs, etc. on metal, concrete or wooden pole – supports, making a long lasting, greatly tightened, secure attachment without drilling and welding. This system has long been in use by the electrical industry in the developed countries.

• Packing: 1 pcs
• Weight: 1.8 kg/ pcs
• Code number: 4710002

PULLING GRIP FOR STAINLESS STEEL BANDS

Used for tightening and cutting of stainless steel bands (steel support rings) used for securing equipment to poles. This is a very reliable and practical way for quick and easy securing of brackets, stands, supports, lamps, protection devices, signs, etc. on metal, concrete or wooden pole – supports, making a long lasting, greatly tightened, secure attachment without drilling and welding. This system has long been in use by the electrical industry in the developed countries.

• Packing: 1 pcs
• Weight: 1.78 kg/ pcs
• Code number: 4710000

FLUORESCENT FIXTURES WITH AND WITHOUT SHADES

We make open type fluorescent armatures in three standard dimensions: 20W-618 mm, 40W- 1228 mm, 65W-1528 mm.
We make all three kinds for one, two or three fluorescent tubes with or without the corresponding reflector. The lamp housing is made of pickled, profiled sheet metal with baked on white enamel, completely wired in accord with the appropriate JUS and IEC standards. The lights are made with IP 20 protection and enable quick and easy installation.
They are designed for general use areas: hospitals, hallways, passages, warehouses and all other locations where lights are not exposed to great exposure to dust and damp.
Fluorescent lights can be also installed in a linear system which enables quick mounting and is universally accepted. The linear system consists of an upper part (housing of a specified length) and a lower part (tube housing of a specified electrical power). Advantages are: Quick installation, long lasting and simple maintenance. The linear system is made with IP 20 protection and is recommended for use in factories, halls, warehouses and areas where lights are not exposed to great exposure to dust and liquids. If the area is higher than 5 m we recommend using reflectors that direct the light beam from above.

WATER-RESISTANT FLUORESCENT FIXTURES

DESCRIPTION

Lamp is intended for lighting of industrial objects, especially where there is a greater exposure to damp and dust. The lamp body is made of ABS. The fasteners for securing the cover are stainless steel. The polyurethane gasket is cast directly into a groove of the lamp. Polyamide couplings enable IP 65 protection. The cover is made of transparent poly-carbonate, which is UV stabile, (which means that there will not be any great change in the material due to the effects of ultra-violet light rays). The steel reflection plate is plasticized in white and is UV stable.

Code number Max power W Degree od protection Dimensions mm Weight kg 3910118 1 x 18W IP 65 670 x 105 x 75 0,9

Code number Max power W Degree od protection Dimensions mm Weight kg 3910218 2 x 18W IP 65 670 x 105 x 75 1,46

Code number Max power W Degree od protection Dimensions mm Weight kg 3910236 2 x 36W IP 65 1270 x 165 x 75 2,3

Code number Max power W Degree od protection Dimensions mm Weight kg 3910118 1 x 18W IP 65 670 x 105 x 75 0,9

HALOGEN REFLECTOR 2000W

DESCRIPTION

Reflector can be installed either on a wall or a pole. The reflection surface, (rotationally msymmetric) is    made    of   quality    polished aluminum, making very shiny. The light beam is wide and equally distributed, so that the energy expenditure is used to the maximum. Adjustable   to    all   positions   as desired. The insulation degree of the lamp is IP54. The reflector is connected to a voltage network of 230V/400V. The recommended diameter of copper cable is 3×2,5 mm2.

Accompanying gear:

• Metal-halogen bulb 2000W
• Condenser 60µF ,400V

All these characteristics make this reflector suitable for a wide spectrum of usage, for both exterior and interior installation, but most often used for illuminating entrances and approaches to factory grounds, sports fields, stadiums, work-shops, displays, hallways, facades, etc.

RECESSED LIGHTS FOR INDIRECT LIGHTING – FUSIO

Represents a new concept in office lighting. Built into ceilings of 600 x 600. Its unique system of indirect lighting provides a comfortable and original space lighting. Made of steel sheet metal, painted in standard white color.