Monthly archives: May 2015
Entries found: 5
DEVICE FOR TRANSFERRING MV ABC FROM PULLEY TACKLE ONTO SUPPORTING CLAMP
This device for transferring cable bunch from pulley tackle onto supporting clamp is a new product on the Euro market. It is very simple to work with and makes the job of mounting cable bunches easier. It is intended for laying mid-voltage cable bunches and also for mounting ABC of 0,4 kV. The device has a built-in hydraulic by which cable bunch is risen over yoke and chain and transmitted to the supporting clamp. DEVICE FOR TRANSFERRING CABLE BUNCH FROM PULLEY TACKLE ONTO SUPPORTING CLAMP CONSISTS OF:
- Package: 1 pc
- Device weight: 7 kg
- Code number: 4880010
EQUIPMENT FOR CARRYING SUPPORT OF MV ABC CABLE AND Al-STEEL ROPES
Used for carrying support of MV ABC cables on posts. Min. breaking force is 40 kN (without carrying clamp). Steel parts are usually cold galvanized, but on customer’s request we do hot – dip galvanizing.
Code number | For post ∅ mm | Package pcs | Weight kg/100pcs |
4891160 | 160 | 5 | 7.25 |
4891200 | 200 | 5 | 7.25 |
4891250 | 250 | 5 | 7.25 |
4891315 | 315 | 5 | 7.25 |
EQUIPMENT FOR DOUBLE TENSION SUPPORT OF MV ABC CABLES AND Al-STEEL ROPES
It includes two clamps for mid-voltage ABC, two hinges, double hinge support, general purpose bracket, and an appropriate support ring. Usually cold galvanized, but on customers request hot-dip galvanized.
Code number | For post ∅ mm | Package pcs | Weight kg/100pcs |
4893160 | 160 | 1 | 5.47 |
4893200 | 210 | 1 | 5.67 |
4893250 | 250 | 1 | 5.92 |
4893315 | 315 | 1 | 6.07 |
EQUIPMENT FOR SINGLE TENSION SUPPORT OF MV ABC AND Al-STEEL ROPES
This equipment includes clamp for mid-voltage ABC, hinge, hinge support, general purpose bracket and an appropriate support ring. Usually cold galvanized, but on customer’s request we do hot dip galvanizing.
Code number | For post ∅ mm | Package pcs | Weight kg/100pcs |
4892160 | 160 | 1 | 4.67 |
4892200 | 210 | 1 | 4.87 |
4892250 | 250 | 1 | 5.12 |
4892315 | 315 | 1 | 5.27 |
CLAMP FOR TENSIONING SUPPORT OF MV ABC CABLES AND Al-STEEL ROPES
It is used for double angular and tensioning support of mid-voltage cable bunch (non insulated Al-steel rope). Supporting of MV ABC cables is done through the carrying rope. It is used in combination with the hinge support and the general purpose bracket. (ordered separately).Minimum breaking force is 40 kN (without tension bearing clamp) NOTE: When ordering, please indicate if it is for ABC or for non insulated rope.
Code number | Clamp for Al-Steel rope mm² | Package pcs | Weight kg/100pcs |
4850350 | 35 | 10 | 246.0 |
4850500 | 50 | 10 | 246.4 |
4850700 | 70 | 10 | 257.0 |
4850950 | 95 | 10 | 258.5 |
DOUBLE PIPE RINGS WITH TWO NOTCHES
It is used for double sided anchoring of roof-pipe support (bracket) and to connect ABC cables using tension clamp Usually Zn- coated, but on customer’s request, hot- dip galvanized.
Code number | Designation | d mm | L1 mm | L2 mm | Package pcs | Weight kg/100pcs |
3890672 | 2″ | 61 | 175 | 215 | 40 | 72 |
3890674 | 2.5″ | 77 | 192 | 232 | 35 | 75 |
3890676 | 3″ | 90 | 210 | 250 | 35 | 103 |
DOUBLE PIPE RINGS WITH TWO HOLES AND RINGS
It is used for double sided anchoring of roof-pipe support (bracket) and for connecting ABC cables using tension clam. Usually Zn-coated, but on customer’s request hot-dip gal
Code number | Designation | d mm | L1 mm | L2 mm | Package pcs | Weight kg/100pcs |
3890692 | 2″ | 61 | 175 | 215 | 50 | 74 |
3890694 | 2.5″ | 77 | 192 | 232 | 50 | 71 |
3890696 | 3″ | 90 | 210 | 250 | 40 | 105 |
DOUBLE PIPE RINGS WITH TWO HOLES
Used for double sided anchoring of roof pipe support (bracket) using a tension bar. Usually Zn- coated, but on customers request hot-dip galvanized.
Code number | Designation | d mm | L1 mm | L2 mm | Package pcs | Weight kg/100pcs |
3890662 | 2″ | 61 | 175 | 215 | 40 | 73 |
3890664 | 2.5″ | 77 | 192 | 232 | 35 | 76 |
3890666 | 3″ | 90 | 210 | 250 | 35 | 104 |
BENT HOOK PIPE RINGS
It is used for single sided anchoring of roof-pipe support (bracket) and to connect ABC cables by tension clamp. Usually Zn- coated, but on customer request hot-dip galvanized.
Code number | Designation | d mm | L mm | Package pcs | Weight kg/100pcs |
389.652 | 2″ | 61 | 175 | 50 | 69 |
3890654 | 2.5″ | 77 | 192 | 50 | 71 |
3890656 | 3″ | 90 | 210 | 40 | 99 |
SINGLE HOLE PIPE RINGS
It is used for single sided anchoring of roof-pipe support (bracket) and to connect ABC cables by tension clamp. Usually Zn- coated, but on customers request hot-dip galvanized.
Code number | Designation | d mm | L mm | Package pcs | Weight kg/100pcs |
3890620 | 2″ | 61 | 175 | 50 | 68 |
3890625 | 2.5″ | 77 | 192 | 50 | 70 |
3890630 | 3″ | 90 | 210 | 40 | 98 |