WRENCH OK-10 FOR TIGHTENING OF INSULATED CLAMPS

It is used to tighten moment nut on “FIDOS” connection clamps. Enables work under voltage while assembling FIDOS clamps on ABC cables. When working under power, always use protective gloves.

• Package: 100 pcs
• Weight: 0,34 kg/pc
• Code number: 3850100

UNIVERSAL INSULATED WRENCH FOR TIGHTENING OF INSULATED CLAMPS

It is used to tighten moment nut on “FIDOS” connection clamps. It enables work under voltage while assembling FIDOS clamps on ABC cables. This wrench can be used to tighten screw nuts- OK 10, 13, 17 and 22. When installing under voltage, always use protective gloves.

• Package: 10 pcs
• Weight: 6.0 kg/100 pcs
• Code number: 3850105

WRENCH FOR SEPARATING CORES FROM CABLE BUNCH

It is made of special insulated material, of high mechanical strength. Used to separate some cores from the cable bunch, allowing easier clamp installation. When installing under voltage, always wear protective gloves.

• Package: 10 pcs
• Weight: 0,36 kg/pc
• Code number: 3850110

INSULATED ADAPTER FOR SHORT CIRCUIT AND EARTHING

Used for short and earthing of ABC. Assembling is done in combination with FIDOS 16-25/35-70, usually on every first branching post and near the end of the power line. Insulation material is made of polyamide resistant to weather conditions and UV- rays. The adapter is fully waterproof and in accordance with NFC 33 020 standard.

INSULATED SEPARABLE HOUSING FOR SYSTEM FUSES (AERIAL FUSE)

It is meant for protection of public lighting connected to ABC cables, as well as for all types of no insulated aerial lines. This product is made of special insulating materials resistant to temperatures higher than normal, UV-lights as well as all other weather conditions. Using “FEMAN” insulated waterproof clamps FIDOS for connecting to power lines, complete seal is achieved. They are produced in two sizes. This housing has numerous advantages:

• -Easy damage determination.
• -Regardless of the light damage, the rest of the system is working.

INSULATED END CAP

Used to securely close LV ABC ends which prevents moisture penetration into the cable and provides safe work under voltage. It is made of insulated rubber, resistant to UV-rays and all weather conditions.

PULLEY FOR INSTALLING MV ABC ON POSTS – FR 350

This tackle is necessary for installing mid-voltage self-supporting cable bunch. The tackle is hung on the bracket arm, attached to a general purpose bracket. Using the special FEMAN device, insulated supporting MV ABC cable can be switched from this pulley tackle into the clamp for carrying support of the bunch.Max. carrying force is 1600 daN

• Package: 1 pc
• Weight: 8.4 kg/pc
• Code number: 3810005

PULLEY FOR INSTALLING LV ABC ON POSTS – FR 270

For the correct installing of low voltage self-supporting cable bunch, as well as for additional tensioning ,the special pulleys must be used that allow gentle stretching and exclude possibility of differences in flexures between two neighboring fields during tensioning. The pulley construction is such that enables easy assembling and disassembling, as well as the carrying wire inserting in an appropriate clamp. For the stretching needs and the cable joint assembly, we recommend “FEMAN-PULLEY TACKLE ”. Its construction completely fulfills the stretching demands, it is not heavy and it is convenient for assembling and disassembling. The tackle body and the tackle itself are made of aluminum alloy. Turning is performed through slide bearing. Max. carrying force is 1000 daN.

• Package: 1 pc
• Weight: 4.35 kg/pc
• Code number: 3810000

PULLEY FOR INSTALLING LV ABC ON POSTS – FR 150

For the correct installing of low voltage self-supporting cable bunch, as well as for additional tensioning ,the special pulleys must be used that allow gentle stretching and exclude possibility of differences in flexures between two neighboring fields during tensioning. The pulley construction is such that enables easy assembling and disassembling, as well as the carrying wire inserting in an appropriate clamp. The tackle body and the tackle itself are made of aluminum alloy. Turning is performed through slide bearing. Max. carrying force is 800 daN.

• Package: 1 pc
• Weight: 1.8 kg/pc
• Code number: 3810002
  

ANCHORING/SUSPENSION CLAMP FOR LV ABC WITHOUT SUPPORTING CONDUCTOR 2-4x(16-35)

This clamp is intended for tension support of two or four insulated conductors. It is used for anchoring small cross-sections of the distributive bunches, as well as for household connection conductor tightening. It is made of high-quality materials with great mechanical firmness, resistant to all atmospheric influences.

PA/PS 2×16-35 OpenPA/PS 4×16-35 Closed