Yearly archives: 2015
Entries found: 10
PARTITION PLATE FOR TERMINAL BLOCKS
Used for separating commoning link when making a series of VS clamps. Plate thickness is 0.5 mm.
- Package: 100 pcs
- Weight: 0,01 kg/100pcs
- Code number: 5000118
TERMINAL BLOCKS (VS-CLAMPS) SPANNING 1, 5 – 16 mm2 – WITH GEAR
Note: When connecting wire products to VS-clamps, always use insulated connectors or pin-type terminals, or solder the ends.
Code number | Designation mm² | Dimensions AxBxC | Package pcs | Weight kg/100pcs |
5000066 | FKN 16P | 53×50 | 50 | 3.20 |
5000281 | – | 50 | 0.60 | |
5000282 | – | 50 | 0.63 | |
5000284 | – | 50 | 0.90 |
VS CLAMPS FOR STRINGING
FEMAN’s clamp housing for placement in sequence is from recently made exclusively of high quality imported mass, self-extinguishing V-0 and with insulation fixture of 750V and heat resistance 110°C without deformation. The base of the clamp is so constructed to enable them to be placed on all existing rails. FEMAN’S VS clamp are made all in accordance with valid IEC regulations defined for these products. In addition to various size of the clamps (2,5-35mm2), company FEMAN also produces the whole range of accessories-elements.
FEMAN is proved its quality in making the clamps for placement in sequence in the last few years and the reference is more then million pieces delivered and mounted in all dimensions.
Code number | Type | Dimension AxBxC | Packing pcs | Weight kg/100pcs |
5000004 | FKN 2.5-4 | 48x40x7 | 120 | 1.31 |
5000006 | FKN 6 | 48x40x9 | 100 | 1.80 |
5000010 | FKN 10 | 48x40x10 | 100 | 2.20 |
5000016 | FKN 16 | 53x50x12 | 50 | 2.93 |
5000035 | FKN 25-35 | 53x50x15 | 50 | 4.75 |
CURRENT CLAMP FRS SIX-POLE 95/6x(4-16)
It is intended for scheming of measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.
The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 16mm2. Maximum cross section of six branching conductors is 16mm2.
Code no. | Type | Clamping capability of the main conductor | Clamping capability of the branching conductor |
Packing pcs | Mass kg/100pcs |
5000176 | FRS 95/6x(4-16) | 10-16-25-35-50-70-95 mm2 | 6x(4-6-10-16) mm2 | 20 | 30 |
CURRENT CLAMP FRS FOUR-POLE 95/4x(1,5-6)
It is intended for circuits in measuring and distribution enclosures. Housing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp housing is constructed to enable it to be placed in sequence on all existing rails and can be connected sequentially.
The reception of the conductors is done through M8 screws for max. cross section of conductors of up to 95mm2.Maximum cross section of four branching conductors is 6mm2.
Code number | Type | Clamping capability of the main conductor | Clamping capability of the branching conductor | Packing pcs | Mass kg/100pcs |
5000174 | FRS 95/4x(1,5-6) | 6-10-16-25-35-50-70-95 mm2 | 4x(1,5-2,5-4-6) mm2 | 20 | 23 |
CURRENT MODULAR CLAMP FRS
It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.
Cross section of main conductor is 4-35mm2 and cross section of branching conductor is also 4-35mm2.
Code number | Type | Clamping capability of the main conductor | Clamping capability of the branching conductor | Packing pcs | Mass kg/100pcs |
5000167 | FRS 25-35/1 | 4-6-10-16-25-35 mm2 | 4-6-10-16-25-35 mm2 | 75 | 6.5 |
5000168 | FRS 25-35/2 | 4-6-10-16-25-35 mm2 | 4-6-10-16-25-35 mm2 | 75 | 13 |
5000170 | FRS 25-35/4 | 4-6-10-16-25-35 mm2 | 4-6-10-16-25-35 mm2 | 75 | 26 |
CURRENT MODULAR CLAMP MRS 4-16
It is intended for circuits in measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance 110°C without deformation . Contacts are made of brass profile which makes possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable them to be placed in sequence on all existing rails and can be connected sequentially.
Cross section of main conductor is 4-16mm2 and cross section of branching conductor is also 4-16mm2.
Code number | Type | Clamping capability of the main conductor | Clamping capabilityof the branching conductor | Packing pcs | Mass kg/100pcs |
5000185 | MRS 4-16/1 | 4-6-10-16 mm2 | 4-6-10-16 mm2 | 150 | 2.5 |
5000186 | MRS 4-16/2 | 4-6-10-16 mm2 | 4-6-10-16 mm2 | 100 | 5 |
5000187 | MRS 4-16/3 | 4-6-10-16 mm2 | 4-6-10-16 mm2 | 50 | 10 |
SEALING LID FOR CURRENT CLAMP
It is used for sealing of current clamps. It is made of high quality transparent plastic mass.
Code number | Name | Type | Packing pcs | Mass kg/100pcs |
5000188 | Sealing lid FRS 4-16/4 | FPB 4-16/4 | 100 | 1.5 |
5000189 | Sealing lid FRS 16/35 | FPB-D 16-35/2 | 100 | 2.5 |
CURRENT CLAMP FRS SIX-POLE 16-35/6x(4-16)
It is intended for scheming of measuring and distribution enclosures. Bearing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance to 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp bearing is constructed to enable it to place in sequence on all existing rails and can be connected sequentially.
Maximum cross section of main conductors is 35mm2 and maximum cross section of six branching conductors is 16mm2.
Code number | Type | Clamping capability of the main conductor | Clamping capability of the branching conductor | Packing pcs | Mass kg/100pcs |
5000179 | FRS 16-35/4x(4-16) | 16-25-35mm2 | 4x(4-6-10-16) mm2 | 30 | 15 |
CURRENT CLAMP FRS FOUR-POLE 16-35/4x(4-16)
It is intended for circuits in measuring and distribution enclosures. Housing is made of high quality imported plastic mass , self-extinguishing V-0 and heat resistance to 110°C without deformation. Contacts are made of brass profiles which make possible simultaneous connection of aluminum and copper. Clamp housing is constructed to enable it to be placed in sequence on all existing rails and can be connected sequentially.
Maximum cross section of main conductors is 35mm2 and maximum cross section of four branching conductors is 16mm2.
Code number | Type | Clamping capability of the main conductor | Clamping capability of the branching conductor | Packing pcs | Mass kg/100pcs |
5000179 | FRS 16-35/4x(4-16) | 16-25-35mm2 | 4x(4-6-10-16) mm2 | 30 | 15 |