LED REFLECTOR

The way the housing is made,(pressure cast aluminum) and the surface protection done by plastification makes this reflector resistant to atmospheric conditions, permitting its use both indoors and outside..
By using anodized, finely polished aluminum, for the reflector surface, a better distribution of the light flux is obtained.
The light beam is wide and uniform, so that the energy spent is used to the maximum. Adjustable to all positions as desired.
With its compact and elegant appearance, it easily adapts to all structures, to both modern and traditional architecture.
All these characteristics make this reflector appropriate for a wide spectrum of applications, for both exterior and interior installation, but it is most often used for lighting entrances, displays, hallways, facades, monuments, parks, etc.

Technical data:

• Installed power 30W
• Nominal voltage 220~240V, 50 Hz
• Protection degree IP 65
• Protection IK 08

PORTABLE FLOODLIGHT

Use for quick and simple lighting of desired areas. The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed, providing the most efficient use of energy. Supplied without bulb and wires.

FLOODLIGHT STANDS

Use for quick and simple lighting of desired areas. The lights can be raised to a height of 2800 mm, can be adjusted forward and back-ward, and can turn 360 degrees.

HALOGEN REFLECTOR

DESCRIPTION

Feman’s halogen reflectors are made to European standards.

The housing is of pressure cast silumine, and its construction is elaborated with ribs to diffuse heat. The surface protection of the housing is plasticized, making it exceptionally resistant to atmospheric conditions. The light beam is wide and equally distributed so that the energy expenditure is used to the maximum. Adjustable to all positions as desired. All these characteristics make this reflector appropriate for a wide spectrum of applications for both exterior and interior installation, but most often is used to light entrances, displays, hallways, facades, monuments, etc.

HALOGEN REFLECTOR WITH SENSOR

DESCRIPTION

This halogen reflector with sensor has the following construction.
The housing is made of pressure cast silumine, with ribs that facilitate better heat dispersion. The surface of the housing is plasticized, which makes it exceptionally resistant to atmospheric conditions.
The light beam is wide and equally distributed, so that the energy expended is used to the maximum. Adjustable to all positions as desired. Voltage is 220 V. Reflector with built-in automatic IR light sensor for switching on, with photo-cell time-clock for lighting, is ideal for an alarm.
All these characteristics make this reflector suitable for a wide spectrum of both exterior and interior installation, but it is most often used for illuminating entrances, displays, hallways, facades, monuments, etc.

OG LAMP

OG LAMP – STRAIGHT	OG LAMP – ANGLED
Code number Type Power W Base 3900090 100W/2 100 E-27 3900110 200W/2 200 E-27	Code number Type Power W Base 3900070 100W/2 100 E-27 3900050 200W/2 200 E-27
MERCURY LAMP – ANGLED	MERCURY LAMP – STRAIGHT
Code number Type Power W Base 3900140 angled 125 E-27	Code number Type Power W Base 3900130 straight 125 E-27
OG LAMP – STRAIGHT	OG LAMP – ANGLED
Code number Type/Power W Base 3900010 100W E-27 3900020 200W E-27	Code number Type Base 3900070 longerbarel E-27 3900050 shorterbarel E-27

CONNECTION PLATE FOR PUBLIC LIGHTING POLES PPROV III

Made of special polyester resin. Installed in larger dimension public lighting poles and for larger diameter feeder cables.

Specifications: Rated voltage: 450 V

Rated fuse current: max 16A Number of fuses: 2

Number of connection wires: 4 Temperature range: -50 to 130 C

Code number: 2900383

CONNECTION PLATE FOR PUBLIC LIGHTING POLES PPR4

Made of special polyester resin. Installed in poles for public lighting.

Specifications: Rated voltage: 450 V

Rated fuse current: max 16 A Number of fuses: 2

Number of connection wires: 4 Temperature range: -50 to 130 C

Code number: 39003874

CIRCUIT BOXES FOR PUBLIC LIGHTING

Circuit boxes for public lighting are made of pressedpolyester reinforced with fiberglass. Resistant to both static and dynamic loads, UV radiation and self-extinguishing, they have a great dielectric strength. At the customer’s request we can make them in protection degrees of IP44, IP54 or Ip65. For detailed information, see our general catalog.

SEGMENTAL TUBULAR STEEL POLES

Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : – those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.