SEGMENTAL TUBULAR STEEL POLES

Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : – those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.

SEGMENTAL TUBULAR STEEL POLES

Tubular metal poles are intended for use in illuminating roadways, parks, pathways, etc. These poles are made of quality steel pipes that are joined by arc welding. Therefore, poles thus produced have good mechanical characteristics and in shape satisfy all esthetic requirements of contemporary public lighting. Surface protection is by hot-dipping or with protective polyester electrostatic enamel in various colors from the RAL color card. Depending on the manner of placement, the poles are of two types : those placed in a concrete foundation, Type (A) and – those for securing into a concrete foundation using three or four anchor hooks, Type (B). The top of the pole (Detail ”A”) is made according to the type of lamp, ø48 or ø60.

STEEL LAMP HOLDERS

Holder for street light 1 ½”

For binding on the pole. The binding is performed with stainless steel bands (page 57). The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number: 3900400

Holder for street light 1 ½”

Oblique without flange for top part of steel pole, (according to requests we can produce for concrete poles). The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number: 3900440

Holder for street light

Mounting is performed with brackets installed on the pole. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Reducer for top part of steel pole Ø76/60 90º double The installation is performed on the top part of the pole by

screwing three screws. The surface is protected by using electro- static paints and according to the desire of the client it can be hot galvanized.

Code number: 3900403

Reducer for top part of steel pole Ø76/60 90º. The installation is performed on the top part of the pole by screwing three screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number: 3900402

Reducer for holder Ø76/60

Installation is performed on top of the pole by screwing three screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number: 3900404

STEEL LAMP HOLDERS

Aligning holders

For street lights on poles. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Holder for street light 1 ½”

For wall mounting. The installation can be done with 4 screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number 3900430

Aligning holder under angle from 0-90º

For street lights, installation is performed on poles Ø48-76. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number 3900405

Holder for street light 1 ½”

With flanges for mounting on top of concrete poles. The installation can be done with 4 screws. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized.

Code number 3900420

Holder Ø48-110º for poles 120-130

The mounting is performed by screwing the holder on the pole with two brackets at the bottom of the holder. The surface is protected by using electro-static paints and

Holder for poles 1000/1500-95º

The mounting is performed by screwing the holder on the pole with two brackets at the bottom of the holder. The surface is protected by using electro-static paints and according to the desire of the client it can be hot galvanized

Code number 3900410

FLUO LAMPS FOR URBAN LIGHTING

Technical details:

• IP protection………………………………………….54 IP
• IK resistance …………………………………………. 8 IK
• Installation on poles………………………………..3-5m
•   Dimension…………………………………. 500x430mm

Fluo lamps for urban lighting are used for illumination of parks, city squares, sidewalks, factory grounds and all other places where good illumination is necessary. Advantages:

Degree protection of complete lamp    IP 54

Impact resistant     IK 08

Consists of: body made of aluminium alloy casted under high-pressure, cover of the lamp is made of sheet metal with system pure aluminium mirror, poly-carbonated protector and aluminium , aluminium lens-hood. All external parts are made of stainless steel.

Replacement of bulb is very simple – by unscrewing two bolts on the lid of the lamp which offers easy approach to the bulb.

Mounting:

The lamp is mounted vertically on the pole Ø 90. It is attached by three bolts. Power W: fluo lamp up to 60W

Bulb holder: E-27

LAMP FOR URBAN LIGHTING

Technical details:

• IP protection …………………………………………………… IP 65
• IK resistance…. ………………………………………………… IK 8
• Installation on poles ………………………………………….3-5m
• Dimension…….. ……………………………………….. 710x440mm

Lamps for urban lighting are used for illumination of parks, city squares, sidewalks, factory grounds and all other places where good illumination is necessary.

Advantages:

Degree protection of complete lamp   IP 65

Impact resistant   IK 08

Consists of: body made of aluminium alloy casted under high-pressure, aluminium mirror, poly-carbonate protector, and silicone sealant. All external parts are made of stainless steel. Replacement of bulb is very simple – by unscrewing two bolts on the lid of the lamp which offers easy approach to the bulb.

Mounting:

The lamp is mounted vertically on the pole Ø 76. It is attached by four bolts. Power W: metal halogen 70 and 150W

Bulb holder: RX7s

MERCURY-SODIUM STREET LAMP

ADVANTAGES

The advantage of this lamp compared to others is that it is 50% lighter and is not subject to great vibration during storms and wind, which are the most frequent cause of damaged electrical connections, which greatly shorten the life of the light.

DESCRIPTION

Use for illumination of streets, parks, squares, yards, factory grounds, as well as all other places needing good illumination.

This street lamp is made of material highly resistant to all atmospheric conditions, such as, for example, high and low temperatures. The body of the lamp is made of aluminum and the tightening support parts from zinc protected steel. The ballast housing is protected by a cover made of reinforced UV- stabile polyamide, which makes it resistant atmospheric conditions.

CHARACTERISTICSProtection degree:Optical block IP 54 Starter device part IP 23 Voltage: 220-240V, 50-60Hz Power: 1,15A Blow resistance (glass) : IK 08 Lamp weight: without starter device: 3,8 kg Dimensions: 475x250x170

FLUORESCENT STREET LAMP 2×11-18W

ADVANTAGES:

• Economical
• Simple installation

DESCRIPTION

Lamp is intended for public lighting and consists of housing and cover of aluminum. The optical block is  a  sealed  unit: polished, anodized, very pure aluminum mirror, and cover of extruded poly-carbonate. Starter device (IP 23) is mounted on a simply changed base.This lamp for public illumination can be equipped with compact fluorescent bulbs of either 11W or 18W. The very high degree of protection, the strong material from which it is made and the exceptional photometric performance guarantees quality lighting with reduced maintenance costs. Use for lighting highways, streets, parks, squares, yards, factory grounds, and all other places where good illumination is needed.

CHARACTERISTICS Protection degree: Optical block IP 54 Starter device part IP 23 Voltage: 220-240V, 50-60Hz Power: 0,44A Blow resistance (glass) : IK 08 Lamp weight: * without starter: 2,5 kg Dimensions:      376,5x250x170

FOPAL 1 – STREET LIGHT

This lantern is made with the same characteristics as lantern made in EU and which is used in Serbia

Fopal lanterns are used for lighting streets, parks, billboards, squares, factory grounds, as well as all other places that need good lighting. They consist of: housing made of die cast aluminum alloy, aluminum mirror, protector made of polycarbonate and gasket silicone rubber. All fittings are made of stainless steel material.

Installation:

Lantern can be mounted horizontally on the lyre Ø48 or vertically, on the pole, with carrier. It can simply be fastened with two screws. Advantage of the lamp is easy manipulation while working because the use of tools isn’t required when replacing a light bulb.

STREET LIGHT WITH SOLAR PANELS

Technical details:

• Maximum power ……………………………. 100 W
• Voltage …………………………………………. ….. 12 V
• Dimensions …………………………. 970x808x35 mm

Lamp power supply using solar energy consists of: LED lamps,housing made of a aluminum alloy casted under pressure, a protector of toughened glass, aluminum mirror, diode bulbs, and three-layer silicon gaskets. Solar panel, which consists of photo voltage cells that convert sun energy into electricity. Battery that accumulates electricity during the day so can during night, feed Led lamp. Controller that has the function of the monitoring the battery.In addition to 100% energy saving one of the significant advantages is the working life of diode is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diode have high efficiency, unlike other sources of light whose intensity drop during operation and up to 50% sodium lamps after 30,000 hours, while the LED’s intensity drops 30% after 70,000 working hours.