LAMP FOR URBAN LIGHTING

Technical details:

• IP protection …………………………………………………… IP 65
• IK resistance…. ………………………………………………… IK 8
• Installation on poles ………………………………………….3-5m
• Dimension…….. ……………………………………….. 710x440mm

Lamps for urban lighting are used for illumination of parks, city squares, sidewalks, factory grounds and all other places where good illumination is necessary.

Advantages:

Degree protection of complete lamp   IP 65

Impact resistant   IK 08

Consists of: body made of aluminium alloy casted under high-pressure, aluminium mirror, poly-carbonate protector, and silicone sealant. All external parts are made of stainless steel. Replacement of bulb is very simple – by unscrewing two bolts on the lid of the lamp which offers easy approach to the bulb.

Mounting:

The lamp is mounted vertically on the pole Ø 76. It is attached by four bolts. Power W: metal halogen 70 and 150W

Bulb holder: RX7s

MERCURY-SODIUM STREET LAMP

ADVANTAGES

The advantage of this lamp compared to others is that it is 50% lighter and is not subject to great vibration during storms and wind, which are the most frequent cause of damaged electrical connections, which greatly shorten the life of the light.

DESCRIPTION

Use for illumination of streets, parks, squares, yards, factory grounds, as well as all other places needing good illumination.

This street lamp is made of material highly resistant to all atmospheric conditions, such as, for example, high and low temperatures. The body of the lamp is made of aluminum and the tightening support parts from zinc protected steel. The ballast housing is protected by a cover made of reinforced UV- stabile polyamide, which makes it resistant atmospheric conditions.

CHARACTERISTICSProtection degree:Optical block IP 54 Starter device part IP 23 Voltage: 220-240V, 50-60Hz Power: 1,15A Blow resistance (glass) : IK 08 Lamp weight: without starter device: 3,8 kg Dimensions: 475x250x170

FLUORESCENT STREET LAMP 2×11-18W

ADVANTAGES:

• Economical
• Simple installation

DESCRIPTION

Lamp is intended for public lighting and consists of housing and cover of aluminum. The optical block is  a  sealed  unit: polished, anodized, very pure aluminum mirror, and cover of extruded poly-carbonate. Starter device (IP 23) is mounted on a simply changed base.This lamp for public illumination can be equipped with compact fluorescent bulbs of either 11W or 18W. The very high degree of protection, the strong material from which it is made and the exceptional photometric performance guarantees quality lighting with reduced maintenance costs. Use for lighting highways, streets, parks, squares, yards, factory grounds, and all other places where good illumination is needed.

CHARACTERISTICS Protection degree: Optical block IP 54 Starter device part IP 23 Voltage: 220-240V, 50-60Hz Power: 0,44A Blow resistance (glass) : IK 08 Lamp weight: * without starter: 2,5 kg Dimensions:      376,5x250x170

FOPAL 1 – STREET LIGHT

This lantern is made with the same characteristics as lantern made in EU and which is used in Serbia

Fopal lanterns are used for lighting streets, parks, billboards, squares, factory grounds, as well as all other places that need good lighting. They consist of: housing made of die cast aluminum alloy, aluminum mirror, protector made of polycarbonate and gasket silicone rubber. All fittings are made of stainless steel material.

Installation:

Lantern can be mounted horizontally on the lyre Ø48 or vertically, on the pole, with carrier. It can simply be fastened with two screws. Advantage of the lamp is easy manipulation while working because the use of tools isn’t required when replacing a light bulb.

STREET LIGHT WITH SOLAR PANELS

Technical details:

• Maximum power ……………………………. 100 W
• Voltage …………………………………………. ….. 12 V
• Dimensions …………………………. 970x808x35 mm

Lamp power supply using solar energy consists of: LED lamps,housing made of a aluminum alloy casted under pressure, a protector of toughened glass, aluminum mirror, diode bulbs, and three-layer silicon gaskets. Solar panel, which consists of photo voltage cells that convert sun energy into electricity. Battery that accumulates electricity during the day so can during night, feed Led lamp. Controller that has the function of the monitoring the battery.In addition to 100% energy saving one of the significant advantages is the working life of diode is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diode have high efficiency, unlike other sources of light whose intensity drop during operation and up to 50% sodium lamps after 30,000 hours, while the LED’s intensity drops 30% after 70,000 working hours.

LED KRISTAL 3 – STREET LIGHT

For a brighter future with Serbian lamps made to European standards.

Specifications:
• IP protection…..IP 67
• IK resistance….IC 8
• Mounting on pole…..5-9 m
• Luminous flux……100lm/W

LED lamps used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of tempered glass, aluminum mirror, diode lamp with lenses on the diods and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy.

Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility of bringing electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that direct light. Energy saving is the life of LED which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LED diodes have high efficiency, unlike other sources of light whose intensity drop during operation up to 50% ,sodium lamps after 30,000 hours, while the LED’s intensity drop 30%, after 70,000 hours .

LED KRISTAL 1 – STREET LIGHT

For a brighter future with Serbian lamps made to European standards.

LED lamps are used for lighting streets, parks, squares, factory, and all other places where good lighting is required. It consists of a housing made of aluminum alloy casted under pressure, a protector of toughened glass, aluminum mirror, diode lamp lenses for LEDs and three-layer silicon gaskets. LED lamp with a panel works on the utilization of solar energy. Solar panel in combination with LED lamp is durable and cost effective solution in many situations. The biggest advantage is the possibility of lighting the roads, parks, roads where there is no possibility to connect to electric power.

Advantages: The biggest advantage of LED lamps is the possibility of uniform rectangular light propagation with the same intensity under the lights and in the end points of the illuminated surface. This effect is achieved by using specially made lenses that guides light. Energy saving is the life of LEDs which is greater than 50,000 working hours, which is 5 to 10 times more than sodium and mercury lamps. LEDs have high efficiency, unlike other sources of light whose intensity drop during operation and up to 50% sodium lamps after 30,000 working hours, while the LED’s intensity drop 30% after 70,000 working hours.

EURO KRISTAL 22 – STREET LIGHT

For a brighter future with Serbian lamps made to European standards.

Purpose:

Used to illuminate streets, parks, squares, factory grounds and all other places where lighting is needed. Consists of : housing of die casted aluminium under pressure, protector made of tempered glass, aluminium mirror with high brightness, replaceable plates for pre- connection device, silicone seal, horizontal-vertical lamp support ø48mm.

Advantages:

• Protection degree of complete light IP 66
• Protector from mechanically reinforced tempered glass, resistant to impact, excluded possibility of protector weakness and color change after a few years
• Housing made of die casted aluminum under pressure which makes this lamp light and firm
• The lamp is painted with electro-static paints in RAL 7035
• Outstanding features and variable photometric properties
• Mechanical reliability
• Excluded possibility of unpleasant blinding of the vehicle driver, driving on the street equipped with Euro Kristal light
• Aero-dynamic shape of Euro Kristal lights absorbs the wind blows.

EURO KRISTAL 11 – STREET LIGHT

For a brighter future with Serbian lamps made to European standards.

Purpose:

Used to illuminate streets, parks, squares, factory grounds and all other places where lighting is needed. Consists of : housing of die casted aluminium under pressure, protector made of tempered glass, aluminium mirror with high brightness, replaceable plates for pre- connection device, silicone seal, horizontal-vertical lamp support ø48mm.

Advantages:

• Protection degree of complete light IP 66
• Protector from mechanically reinforced tempered glass, resistant to impact, excluded possibility of protector weakness and color change after a few years
• Housing made of die casted aluminum under pressure which makes this lamp light and firm
• The lamp is painted with electro-static paints in RAL 7035
• Outstanding features and variable photometric properties
• Mechanical reliability
• Excluded possibility of unpleasant blinding of the vehicle driver, driving on the street equipped with Euro Kristal light
• Aero-dynamic shape of Euro Kristal lights absorbs the wind blows.

EURO KRISTAL 3 – STREET LIGHT

For a brighter future with Serbian lamps made to European standards.

Purposes:

Use for lighting streets, parks, squares, factory grounds, as well as all other places needing good illumination. Consists of: Housing of pressure cast aluminum alloy, forged glass lens, exceptionally high brightness aluminum reflector adjustable socket, replaceable plate for pre-connection device, silicon seal, horizontal-vertical lamp support (ø60mm).

Advantages:

• Protection degree of optical parts IP 66
• Protection degree of pre-connection device part IP 65
• Lens is of mechanically strengthened forged glass, blow resistant & the possibility of the lens falling or changing color after a couple of years is
• Housing of pressure cast aluminum makes this lamp strong and light
• Exceptional & adjustable photometric features
• Mechanical reliability
• The possibility of unpleasant blinding of auto drivers driving on streets lighted by Euro kristal lamps is excluded.
• Aero-dynamic shape of Euro kristal lamps absorbs the force of the wind