Monthly archives: May 2015
Entries found: 5
HYDRAULIC PRESS – FPS-200
Use for bending Al and Cu distribution rails to angles up to 90°. Can bend rails up to a maximum width of 200 mm and thickness to 15 mm. Very convenient for work in the field. To power this hydraulic head use FEMAN hydraulic pump FKPU-700D, which is ordered separately.
- Dimensions: 215xa50x352 mm
- Weight: 18 kg/ea.
- Code number 1870200
HYDRAULIC DRILL PRESS FPB-20
Hydraulic press for punching Al and Cu rails of up to 15 mm thickness. Hole range is ø6-25mm. Working pressure is 700 bars, and for power use a hydraulic or electrical pump, which is ordered separately. When ordering, give the desired punch diameter.
- Dimensions: 372×280 mm
- Weight: 16 kg/ea.
- Code number for FPB-20: 1860200
- Code number for FPB-20 K1 (FPB-20
- with tools ø6-25 mm): 1860202
HYDRAULIC CABLE CUTTER FHM-50
Intended for cutting Al and Cu cables of ø50mm maximum diameter. The hydraulic cutter is attached to a hydraulic or an electrical pump, which is ordered separately. For power use an electrical pump or a manual-pedal hydraulic pump.
- Length: 340 mm
- Weight: 6 kg
- Code number: 1870399
HYDRAULIC CRIMPER – FF-400
This crimper was developed for the purposes of the railroad, but it also can
be used for hexagonal crimped connections of all types of wires up to 240mm² in diameter. A crimper with this construction of the head can develop a force of 30 t. The crimper consists of a high pressure pump, a high pressure tube, (which joins the body of the crimper with the crimping unit, the hydraulic head for crimping and the tools. The crimper tools that are placed in the hydraulic head for crimping are two-part and work in the following variations:
- Pressing tool for fastening clamps for extending contact wires
- Tool for disconnecting clamps for extending contact wires
- Tool for crimping clamps for joining contact wire and support cable
- Tool for disconnecting contact wire from clamp and support cable
- Tool for hexagonal crimping of connector sleeves for extending support cables
- Tool for cutting contact wire and support cable
- Dimensions: 820 x 200 x 140mm
- Length of high pressure tubing: 2m
- Weight of set: 16.5 kg
- Code number: 18844000
HYDRAULIC HEAD FOR CRIMPING – FCO-630
Hydraulic head is intended for hexagonal compression of Al and Cu joining gear of larger dimensions 50-630 mm². For power to this hydraulic crimper use FEMAN hydraulic pump FKPU-700D, which is ordered separately. Changeable tools for hexagonal crimping work for Al and Cu of 50-630 mm². This hydraulic head with dies for 35, 50 and 70 mm² is used for crimping stainless steel sleeves when joining the support cable for a mid-voltage cable bundle.
- Dimensions: 360×160 mm
- Weight: 16 kg/ea.
- Code number: 1850630
| Code number | Name of set | Weight kg |
| 1850632 | Carrying case for crimper FCO-630 and dies | 6.20 |
| 1850634 | Set of dies for FCO-630 – STANDARD (Al 300, 400, 500, 630 and Cu 300, 400, 500, 630) | 12.92 |
BOLT CUTTER
Use for cutting bolts. Cutting power is 16t. Width of cut is 20mm. For power use either hydraulic or electrical pump.
| Code number | Designation | Dimension | Weight kg/ea |
| 1883116 | FYP-24 | M12-M16 | 1.60 kg |
| 1883127 | FYP-41 | M22-M27 | 4.50 kg |
HYDRAULIC CABLE CUTTER
Intended for cutting of telephone, Al and Cu cables. For power for this hydraulic cable cutter use either a hydraulic or electrical pump.
| Code number | Designation | Telephone/Al-Cu cable mm | Lenght mm | Weight of case kg/es |
| 1870397 | FHM-85B | ∅85/∅50 | 465 | 8.20 |
| 1870398 | FHM-100B | ∅100/∅75 | 515 | 8.70 |
HYDRAULIC CUTTER FHMC
Use for cutting of rebar, rods and Al-Steel cables of ø4-ø22. For power use either hydraulic or electrical pump.
| Code number | Designation | Diameter | Lenght m | Weight kg/ea |
| 1883016 | FHMC-16 | ∅ 4-16 | 240 | 2.10 |
| 1883022 | FHMC-22 | ∅ 4-22 | 300 | 3.50 |
MANUAL HYDRAULIC CABLE CUTTER
Compact cutter with built-in high pressure hydraulic pump. Intended for cutting Al and Cu cables. The head rotates 360 degrees, permitting easy handling in every possible position.
| Code number | Designation | ∅ blade for Al & Cu | ∅ blade for tel cable | Lenght mm | Weight of head kg/ea | Weight of case kg/ea. |
| 1870390 | FRHM-40 | 32 | 40 | 570 | 5 | 3.25 |
| 1870395 | FRHM-52 | 45 | 50 | 615 | 7 | 3.5 |
MANUAL HYDRAULIC CRIMPER – FRHP-300
A compact crimper with built-in hydraulic pump with high pressure of 700 bars. Use for crimping cable gear for Cu wires of 10 – 300 mm, and Al wires of 10 – 240 mm, threaded connectors, forming sector cable and for FID sleeves. The head of the crimper rotates 360 degrees, permitting crimping in all positions.
- Length: 460 mm
- Weight: 3.3 kg
- Code number: 1870291
| Code number | Name of set |
| 1870296 | Sheet metal carrying case for FRHHP-300 and dies |
| 1870292 | Set FRHP-300 K1 (with crimper FRHP-300, carrying case, and dies: Al, Cu and for threaded connectors |
| 1870293 | Set FRHP-300 K2 (with crimper FRHP-300, carrying case, and dies Al 16-24 and Cu 10-300) |
| 1870294 | Set FRHP-300 K3 (with crimper FRHP-300, carrying case, and dies for Al. |
| 1870295 | Set FRHP[-300 K4 (with crimper FRHP-300, carrying case, and dies for Cu. |
