Monthly archives: May 2015
Entries found: 5
MANUAL HYDRAULIC CRIMPER – FTP-300
Intended for pierced crimping of Al and Cu connection gear. Works in all positions. Use changeable dies for diameters of 16 to 300 mm². Obtains a pressure of 20 t.
- Length of crimper: 700 mm
- Weight of crimper: 5.5 kg
- Code number of crimper: 1870312
Code number | For crimping Cu terminations mm² | For crimping Al terminations mm² |
1870320 | 6-35 | 10-16 |
1870330 | 50-70 | 25-50 |
1870340 | 95-185 | 70-120 |
1870350 | 240-300 | 150-240 |
HYDRAULIC HOLE PUNCH HEAD – FAP-10
This hydraulic head is intended for punching holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. Using FAP-10 saves time and obtains great precision, quality and esthetic appearance. With hydraulic head FAP-10 sheet metal to a thickness of 2.5 mm can be cut. To power this hydraulic head use FEMAN hydraulic pump FKPU-700D (pg.58), which like the dies, is ordered separately.
COFFRET A OUTILS
Code number | Name of set | Weight kg |
1800010 | Manual tool for punching sheet metal – set (tools Pg11 – Pg 36) | 1.70 |
1850100 | Hydraulic tool for punching sheet metal – set (hydraulic head, carrying case with set of tools and pump | 21.01 |
1850101 | Hydraulic tool for punching sheet metal(hydraulic head, carrying case with tools Pg 9- Pg 48) | 10.81 |
1850105 | Carrying case for tools for punching sheet metal | 1.31 |
MANUAL MECHANICAL CRIMPER – FP-185
Universal, thanks to its construction. Accepts dies for: Cu and Al connecting gear, threaded connectors, FID sleeves and for forming sector
cables. The die head turns 360 degrees, permitting easy handling in any position. The telescoping handle extend from 600 to 860 mm. Practical for work in trenches, cabinets, on poles and everywhere that is difficult to approach.
- Length: 590mm
- Weight: 2.5 kg
- Code number: 1801850
Code number | Name of set | Weight kg |
1801859 | Carrying case for crimper FP-185 and dies | 4.90 |
1801851 | Set FP-185 K1 (crimper FP-185 with dies for Al, Cu, threaded connectors andcarrying case | 9.65 |
1801852 | Set FP-185 K2 (crimper FP-185 with dies for Al, Cu and carrying case | 8.85 |
1801853 | Dies for crimper FP-185 Cu set (10-185 mm²) | 0.80 |
1801854 | Dies for crimper FP-185 Al set (16-185 mm²) | 0.65 |
1801855 | Dies for crimper FP-185 threaded connectors set (25-95 mm²) | 0.80 |
1801856 | Dies for crimper FP-185 for forming sector cable set | 1.85 |
The carrying case is for packing the crimper with the set of dies and is made of sheet steel with divisions to hold the dies and the crimper. Has a carrying handle. The dimensions of the case are 60 x 610 x 300 mm
MANUAL MECHANICAL CRIMPER – FRP-300C
This crimper was developed on the basis of the perfection of FEMAN’s manual mechanical crimpers, so that today it counts as the best manual mechanical crimper. The head of the crimper turns 360°, permitting crimping in all positions. The
handles telescope, extending from 600 to 800 mm and depending on the length of the rod, significantly reduces the amount of pressure the installer needs to use on the handle during crimping.
The handles are extended for work with larger diameters, and for smaller ones the standard handle length is sufficient.
The crimper and crimping dies are packed in an appropriate metal carrying case.
- Length: 510 mm
- Weight: 8.04 kg
- Code number: 1800299
Code number | Name of set |
1800305 | Metal case for crimper FRP-300 C and dies |
1800301 | Set FRP-300 C K1 (with crimper FRP-300 C and dies for Al, Cu and for threaded connectors) |
1800302 | Set FRP-300 C K2 (with crimper FRP-300 C, case and dies for Al 16-240 and Cu 10-300) |
1800303 | Set FRP-300 C K3 (with crimper FRP-300 C, case and dies for Al) |
1800304 | Set FRP-300 C K4 (with crimper FRP-300 C, case and dies for Cu) |
MANUAL CUTTERS FOR Al AND Cu CABLES
Angle cutting with these cutters is appropriate for cutting aluminum and copper cables. Cutting of Al-steel ropes is forbidden for it would cause permanent damage to the blades.
Code number | Designation | ∅ cable mm | Lenght mm | Weight kg |
1800040 | FM-40 | 28 | 700 | 3.20 |
1800450 | FLK-450 | 25 | 470 | 1.75 |
1801325 | FLK-325 | 40 | 1126 | 4.36 |
MANUAL REBAR CUTTER – FMA-800
Rebar cutter is used in construction for the cutting of iron for armatures. Made of very high quality steel with blades set so that they can be reversed which significantly extends the life of the cutter. It is intended for cutting soft rebar of up to ø10 in diameter, and hard rebar of up to ø8 in diameter.
MANUAL HOLE CUTTER – FRAP-60 (SET)
This tool is intended for making holes in sheet metal in control boards – panels for entries, control instruments, lamps, switches, etc. Using FRAP-60 saves time, obtains great precision, quality and esthetic appearance. With the FRAP-60 tool sheet metal to a thickness of 2mm can be cut.
The FRAP-60 set contains: Round punches: ø22; ø27.5; ø34.3; ø43; ø49; ø60.8; small shaft, large shaft, driver and plastic carrying case.
CUTTER FOR REMOVING CABLE INSULATION AND SEMI-CONDUCTOR SHEATHING – FNSP-40
Use for removing insulation from the ends of cables and semi-conductor sheathing of from ø20 to ø40mm. Includes a hex wrench for regulating the depth of the cut. Note: The blade is not intended for cutting of mechanically protected cables.
STRIPPER DEVICE
HOB STRIPPER FLY-5274
Use for stripping wires of 0.75-6 mm². Includes an addition for pierced crimping.
STRIPPER FOR REMOVING SHEATHING FLY-700 B
Use for stripping insulation from wires of 0.75-4 mm² diameter.
UNIVERSAL WIRE STRIPPER FLY-700 D
Use for stripping of wires of 0.2-8 mm², with a stripping length regulator of up to 25 mm. Includes an addition for wire cutting.
STRIPPER FOR COAXIAL CABLE FHT-320
Use to remove sheath from coaxial cables (RG 58, RG 59 and RF 75). Along with the stripper is supplied a hex wrench which regulates the depth of the cut to the sheathing. The stripper has two blades that permit the independent removal of the external and internal coat.
AUTOMATIC TIE GUN FLY-600 L
Use to tighten ties of widths up to 13 mm when wrapping and placing cable bundles.
Has the possibility of regulating the jaw force, which permits the cutting off of the extra tie after reaching the indicated force.
UNIVERSAL KNIFE FOR STRIPPING SHEATH FLY-25-6
Use to remove sheathing from cables of diameter up to ø28mm. The bolt in the lower part of the knife regulates, depending on the diameter of the cable.
UNIVERSAL PLIERS FOR LEAD SEALS
Use for protection (lead seal) of metering groups, but also for all other locations where it is necessary to protect equipment from unauthorized opening.
TIE GUN – FLY-600
Use to tighten ties up to 5mm in width while wrapping and placing cables. Has the option of regulating the jaw force, which permits the cutting off of
the extra tie after reaching the designated force.
CUTTER DEVICE
CABLE CUTTER FLK-325 A
Use for cutting Al and Cu cables without steel covering up to 185 mm²
CABLE CUTTER (LARGER) FLK-60A
Use for cutting of aluminum and copper wires of up to 50mm².
ELECTRONICS WIRE CUTTER FLY-109
Use for telephone and electronics for shortening small diameter wires – up to ø 1 mm.
STRANDED WIRE CUTTERS FLY-206
Use for cutting flexible wires of small diameter up to ø 18 mm.